24
Vigyázat!
Ezen funkciók használatához a készüléket Bluetooth technológián keresztül
kell csatlakoztatnunk a Garmin Connect alkalmazáshoz. A vészhelyzeti név
-
jegyeket Garmin Connect fiókunkban tudjuk megadni.
További információkat a balesetfelismerésről és asszisztenciáról a www.
garmin.com/safety oldalon olvashatunk.
Asszisztencia:
vészhelyzeti névjegyeinknek szöveges üzenetet küld
-
hetünk a nevünkkel, Élő követés hivatkozással és és GPS helyze
-
tünkkel.
Balesetfelismerés:
amikor a készülék kültéri séta, futás vagy kerékpáro
-
zás során balesetet észlel, üzenetet küld vészhelyzeti névjegyeinknek
Élő követés hivatkozással és és GPS helyzetünkkel.
Élő követés:
családunk és barátaink valós időben követhetik versenyein
-
ket és edzéseinket. Követőket hívhatunk meg e-mail-en vagy közösségi
médián keresztül, ezzel lehetővé téve számukra élő adataink megtekin
-
tését a Garmin Connect követő oldalon.
Élő esemény megosztása:
üzeneteket küldhetünk barátainknak és csa
-
ládunknak esemény közben, ezzel valós idejű frissítéseket biztosítva
számukra.
MEGJEGYZÉS!
Ez a funkció kizárólag Android operációs rendszerű
okostelefonnal történő csatlakoztatás esetén érhető el.
Csoport követés
: Ismerőseinket nyomon követhetjük az Élő követés
közvetlenül a képernyőn, valós időben történő megjelenítésével.
Vészhelyzeti névjegyek hozzáadása
Vészhelyzeti névjegyeink telefonszámait a készülék baleset felismerés és
asszisztencia funkcióihoz használja.
1.
A Garmin Connect alkalmazásban nyomjuk meg a
Introduction
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP
Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS
GPS status
Battery status
Smartphone connection status
Wi
‑
Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity (
Charging the Device
, page 26
).
1
Select
START
, and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select
START
to start the timer.
4
Go for a run.
5
After you complete your run, select
STOP
to stop the timer.
6
Select an option:
•
Select
Resume
to restart the timer.
•
Select
Save
to save the run and reset the timer. You can
select the run to view a summary.
•
Select
Resume Later
to suspend the run and continue
recording later.
•
Select
Lap
to mark a lap.
•
Select
Discard
>
Yes
to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account (
Connect IQ Features
,
page 17
).
For more information about activity tracking and fitness metric
accuracy, go to
garmin.com/ataccuracy
.
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select
START
.
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select
START
to start the timer.
NOTE:
The device does not record your activity data until
you start the timer.
Tips for Recording Activities
•
Charge the device before starting an activity (
Charging the
Device
, page 26
).
•
Select
to record laps.
•
Select
UP
or
DOWN
to view additional data pages.
Introduction
1
-t vagy a
threshold estimate, the device prompts you to accept or
decline the estimate.
Getting Your FTP Estimate
Before you can get your functional threshold power (FTP)
estimate, you must pair a chest heart rate monitor and power
meter with your device (
Pairing ANT+ Sensors
, page 21
), and
you must get your VO2 max. estimate (
About VO2 Max.
Estimates
, page 13
).
The device uses your user profile information from the initial
setup and your VO2 max. estimate to estimate your FTP. The
device will automatically detect your FTP during rides at a
steady, high intensity with heart rate and power.
1
Select
UP
or
DOWN
to view the performance widget.
2
Select
START
to scroll through the performance
measurements.
Your FTP estimate appears as a value measured in watts per
kilogram, your power output in watts, and a position on the
color gauge.
Purple
Superior
Blue
Excellent
Green
Good
Orange
Fair
Red
Untrained
For more information, see the appendix (
FTP Ratings
,
page 33
).
NOTE:
When a performance notification alerts you to a new
FTP, you can select Accept to save the new FTP, or Decline
to keep your current FTP (
Turning Off Performance
Notifications
, page 12
).
Conducting an FTP Test
Before you can conduct a test to determine your functional
threshold power (FTP), you must pair a chest heart rate monitor
and a power meter with your device (
Pairing ANT+ Sensors
,
page 21
), and you must get your VO2 max. estimate (
About
VO2 Max. Estimates
, page 13
).
NOTE:
The FTP test is a challenging workout that takes about
30 minutes to complete. Choose a practical and mostly flat route
that allows you to ride at a steadily increasing effort, similar to a
time trial.
1
From the watch face, select
START
.
2
Select a cycling activity.
3
Hold .
4
Select
Training
>
FTP Guided Test
.
5
Follow the on-screen instructions.
After you begin your ride, the device displays each step
duration, the target, and current power data. A message
appears when the test is complete.
6
After you complete the guided test, complete the cool down,
stop the timer, and save the activity.
Your FTP appears as a value measured in watts per
kilogram, your power output in watts, and a position on the
color gauge.
7
Select an option:
•
Select
Accept
to save the new FTP.
•
Select
Decline
to keep your current FTP.
Smart Features
Pairing Your Smartphone with Your Device
To use the connected features of the Forerunner device, it must
be paired directly through the Garmin Connect Mobile app,
instead of from the Bluetooth
®
settings on your smartphone.
1
From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2
Bring your smartphone within 10 m (33 ft.) of your device.
3
Hold
LIGHT
to turn on the device.
The first time you turn on the device, it is in pairing mode.
TIP:
You can hold LIGHT and select to manually enter
pairing mode.
4
Select an option to add your device to your Garmin Connect
account:
•
If this is the first time you are pairing a device with the
Garmin Connect Mobile app, follow the on-screen
instructions.
•
If you already paired another device with the Garmin
Connect Mobile app, from the settings menu, select
Garmin Devices
>
Add Device
, and follow the on-screen
instructions.
Tips for Existing Garmin Connect Users
1
From the Garmin Connect Mobile app, select or .
2
Select
Garmin Devices
>
Add Device
.
Enabling Bluetooth Notifications
Before you can enable notifications, you must pair the
Forerunner device with a compatible mobile device (
Pairing
Your Smartphone with Your Device
, page 15
).
2
Select
Settings
>
Phone
>
Smart Notifications
>
Status
>
On
.
3
Select
During Activity
.
4
Select a notification preference.
5
Select a sound preference.
6
Select
Watch Mode
.
7
Select a notification preference.
8
Select a sound preference.
9
Select
Timeout
.
10
Select the amount of time the alert for a new notification
appears on the screen.
Viewing Notifications
1
From the watch face, select
UP
to view the notifications
widget.
2
Select
START
, and select a notification.
3
Select
DOWN
for more options.
4
Select
BACK
to return to the previous screen.
Managing Notifications
You can use your compatible smartphone to manage
notifications that appear on your Forerunner device.
Select an option:
•
If you are using an Apple
®
device, use the notification
center settings on your smartphone to select the items to
show on the device.
•
If you are using an Android
™
device, use the app settings
in the Garmin Connect Mobile app to select the items to
show on the device.
Playing Audio Prompts During Your Activity
Before you can set up audio prompts, you must have a
smartphone with the Garmin Connect Mobile app paired to your
Forerunner device.
You can set the Garmin Connect Mobile app to play motivational
status announcements on your smartphone during a run or other
activity. Audio prompts include the lap number and lap time,
pace or speed, and ANT+ sensor data. During an audio prompt,
the Garmin Connect mobile app mutes the primary audio of the
Smart Features
15
-t.
2.
Válasszuk a
Biztonság és követés
>
Balesetfelismerés és assziszten-
cia
>
Vészhelyzeti névjegy hozzáadása
pontot.
3.
Kövessük a képernyőn megjelenő utasításokat.
Asszisztencia
A funkció használatához először vészhelyzeti névjegyeket kell megadnunk
(
Vészhelyzeti névjegyek hozzáadása, 24. oldal
1.
Tartsuk lenyomva a
Downloading Connect IQ Features Using Your
Computer
1
Connect the device to your computer using a USB cable.
2
Go to
apps.garmin.com
, and sign in.
3
Select a Connect IQ feature, and download it.
4
Follow the on-screen instructions.
Wi
‑
Fi Connected Features
Activity uploads to your Garmin Connect account
:
Automatically sends your activity to your Garmin Connect
account as soon as you finish recording the activity.
Audio content
: Allows you to sync audio content from third-
party providers.
Software updates
: Your device downloads and installs the
latest software update automatically when a Wi
‑
Fi connection
is available.
Workouts and training plans
: You can browse for and select
workouts and training plans on the Garmin Connect site. The
next time your device has a Wi
‑
Fi connection, the files are
wirelessly sent to your device.
Connecting to a Wi
‑
Fi Network
You must connect your device to the Garmin Connect app on
your smartphone or to the Garmin Express
™
application on your
computer before you can connect to a Wi
‑
Fi network.
1
Hold .
2
Select
Settings
>
Wi-Fi
>
My Networks
>
Add Network
.
The device displays a list of nearby Wi
‑
Fi networks.
3
Select a network.
4
If necessary, enter the password for the network.
The device connects to the network, and the network is added to
the list of saved networks. The device reconnects to this network
automatically when it is within range.
Safety and Tracking Features
CAUTION
Incident detection and assistance are supplemental features and
should not be relied on as a primary method to obtain
emergency assistance. The Garmin Connect app does not
contact emergency services on your behalf.
The Forerunner device has safety and tracking features that
must be set up with the Garmin Connect app.
NOTICE
To use these features, you must be connected to the Garmin
Connect app using Bluetooth technology. You can enter
emergency contacts in your Garmin Connect account.
Assistance
: Allows you to send a text message with your name
and GPS location to your emergency contacts.
Incident detection
: Allows the Garmin Connect app to send a
message to your emergency contacts when the Forerunner
device detects an incident.
LiveTrack
: Allows friends and family to follow your races and
training activities in real time. You can invite followers using
email or social media, allowing them to view your live data on
a Garmin Connect tracking page.
Live Event Sharing
: Allows you to send messages to friends
and family during an event, providing real-time updates.
NOTE:
This feature is available only if your device is
connected to an Android smartphone.
Adding Emergency Contacts
Emergency contact phone numbers are used for the incident
detection and assistance features.
1
From the Garmin Connect app, select or .
2
Select
Safety & Tracking
>
Incident Detection &
Assistance
>
Add Emergency Contact
.
3
Follow the on-screen instructions.
Requesting Assistance
Before you can request assistance, you must set up emergency
, page 21
).
1
Hold the key.
2
When you feel three vibrations, release the key to activate
the assistance feature.
The countdown screen appears.
TIP:
You can select
Cancel
before the countdown is
complete to cancel the message.
Turning Incident Detection On and Off
1
From the watch face, hold .
2
Select
Settings
>
Safety & Tracking
>
Incident Detection
.
3
Select an activity.
NOTE:
Incident detection is available only for outdoor walk,
run, and bike activities.
When an incident is detected by your Forerunner device with
GPS enabled, the Garmin Connect app can send an automated
text message and email with your name and GPS location to
your emergency contacts. A message appears indicating your
contacts will be informed after 30 seconds have elapsed. You
can select
Cancel
before the countdown is complete to cancel
the message.
Starting a GroupTrack Session
Before you can start a GroupTrack session, you must have a
Garmin Connect account, a compatible smartphone, and the
Garmin Connect app.
These instructions are for starting a GroupTrack session with
Forerunner devices. If your connections have other compatible
devices, you can see them on the map. The other devices may
not be able to display GroupTrack riders on the map.
1
Go outside, and turn on the Forerunner device.
2
Pair your smartphone with the Forerunner device (
Pairing
Your Smartphone with Your Device
, page 18
).
3
On the Forerunner device, hold , and select
Safety &
Tracking
>
GroupTrack
>
Show on Map
to enable viewing
connections on the map screen.
4
In the Garmin Connect app, from the settings menu, select
Safety & Tracking
>
LiveTrack
>
GroupTrack
.
5
If you have more than one compatible device, select a device
for the GroupTrack session.
6
Select
Visible to
>
All Connections
.
7
Select
Start LiveTrack
.
8
On the Forerunner device, start an activity.
9
Scroll to the map to view your connections.
TIP:
From the map, you can hold and select
Nearby
Connections
to view distance, direction, and pace or speed
information for other connections in the GroupTrack session.
Tips for GroupTrack Sessions
The GroupTrack feature allows you to keep track of other
connections in your group using LiveTrack directly on the
screen. All members of the group must be your connections in
your Garmin Connect account.
• Start your activity outside using GPS.
Safety and Tracking Features
21
gombot.
2.
Amikor három egymást követő rezgést érzünk, engedjük el a gombot az
asszisztencia funkció aktiválásához.
Megjelenik a visszaszámlálás képernyő.
TIPP!
Visszaszámlálás lejárta előtt a
Leállít
ponttal megakadályozhatjuk
az üzenet elküldését.
Balesetfelismerés be- és kikapcsolása
1.
Az óra számlapon tartsuk lenyomva a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
and settings.
Hold to manually change sports during an activity.
Ä
UP
Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS
GPS status
Battery status
Smartphone connection status
Wi
‑
Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity (
Charging the Device
, page 26
).
1
Select
START
, and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select
START
to start the timer.
4
Go for a run.
5
After you complete your run, select
STOP
to stop the timer.
6
Select an option:
•
Select
Resume
to restart the timer.
•
Select
Save
to save the run and reset the timer. You can
select the run to view a summary.
•
Select
Resume Later
to suspend the run and continue
recording later.
•
Select
Lap
to mark a lap.
•
Select
Discard
>
Yes
to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account (
Connect IQ Features
,
page 17
).
For more information about activity tracking and fitness metric
accuracy, go to
garmin.com/ataccuracy
.
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select
START
.
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select
START
to start the timer.
NOTE:
The device does not record your activity data until
you start the timer.
Tips for Recording Activities
•
Charge the device before starting an activity (
Charging the
Device
, page 26
).
•
Select
to record laps.
•
Select
UP
or
DOWN
to view additional data pages.
Introduction
1
-t.
2.
Válasszuk a
Beállítások
>
Biztonság és követés
>
Balesetfelismerés
pontot.
3.
Válasszunk egy tevékenységet.
NE FELEDJÜK!
A balesetfelis-merés kizárólag kültéri séta, futás vagy ke
-
rékpározás mellett érhető el.
Amikor a GPS-vevővel ellátott Forerunner készülék balesetet érzékel, a
Garmin Connect alkalmazás egy automatikus szöveges üzenetet (SMS-t)
és egy emailt küld az általunk megadott vészhelyzet esetén értesítendő te
-
lefonszámra, email címre. Az üzenet tartalmazza a GPS-pozíciót és nevün
-
ket. Az üzenet megjelenik, és jelzi, hogy 30 másodperc elteltével a vész
-
helyzeti címekre elküldésre kerül az üzenet. Amennyiben segítségre, ellá
-
tásra nincs szükség, ezen időtartamon belül még elvethetjük az automati
-
kus üzenetet.
Csoport követés indítása
A funkció használatához rendelkeznünk kell Garmin Connect fiókkal, va
-
lamint olyan kompatibilis okostelefon párosítása szükséges, melyen fut a
Garmin Connect alkalmazás.
Az alábbi utasítások a csoport követés indítását a Forerunner készülékek
-
re vonatkozóan tartalmazzák. Amennyiben a csoportban tartozó kerékpá
-
rosoknak más típusú, de kompatibilis Garmin készülékük van, mi láthatjuk
őket a térképen, azonban előfordulhat, hogy az eltérő típusú készülékek a
csoport követésben szereplő kerékpárosokat már nem tudják megjeleníte
-
ni a térképen.
1.
Menjünk ki szabad térbe, majd kapcsoljuk be az Forerunnert.
2.
Párosítsuk az okostelefont és a Forerunner készüléket (
készülék párosítása, 21. oldal
).
3.
A Forerunner készüléken nyomjuk meg hosszan a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
LIGHT
Hold to turn the device on.
Hold to view the controls menu.
Select to turn the backlight on and off.
Á
START
STOP
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Â
BACK
Select to record a lap, rest, or transition during an activity.
Select to return to the previous screen.
Ã
DOWN Select to scroll through the widgets, data screens, options,
Hold to manually change sports during an activity.
Ä
UP
Select to scroll through the widgets, data screens, options,
and settings.
Hold to view the menu.
GPS Status and Status Icons
The GPS status ring and icons temporarily overlay each data
screen. For outdoor activities, the status ring turns green when
GPS is ready. A flashing icon means the device is searching for
a signal. A solid icon means the signal was found or the sensor
is connected.
GPS
GPS status
Battery status
Smartphone connection status
Wi
‑
Fi
®
technology status
Heart rate status
Foot pod status
Running Dynamics Pod status
Speed and cadence sensor status
Power meter status
tempe
™
sensor status
VIRB
®
camera status
Going for a Run
The first fitness activity you record on your device can be a run,
ride, or any outdoor activity. You may need to charge the device
before starting the activity (
Charging the Device
, page 26
).
1
Select
START
, and select an activity.
2
Go outside, and wait while the device locates satellites.
3
Select
START
to start the timer.
4
Go for a run.
5
After you complete your run, select
STOP
to stop the timer.
6
Select an option:
•
Select
Resume
to restart the timer.
•
Select
Save
to save the run and reset the timer. You can
select the run to view a summary.
•
Select
Resume Later
to suspend the run and continue
recording later.
•
Select
Lap
to mark a lap.
•
Select
Discard
>
Yes
to delete the run.
Activities
Your device can be used for indoor, outdoor, athletic, and fitness
activities. When you start an activity, the device displays and
records sensor data. You can save activities and share them
with the Garmin Connect
™
community.
You can also add Connect IQ
™
activity apps to your device using
your Garmin Connect account (
Connect IQ Features
,
page 17
).
For more information about activity tracking and fitness metric
accuracy, go to
garmin.com/ataccuracy
.
Starting an Activity
When you start an activity, GPS turns on automatically (if
required). When you stop the activity, the device returns to
watch mode.
1
From the watch face, select
START
.
2
Select an activity.
3
If necessary, follow the on-screen instructions to enter
additional information.
4
If necessary, wait while the device connects to your ANT+
®
sensors.
5
If the activity requires GPS, go outside, and wait while the
device locates satellites.
6
Select
START
to start the timer.
NOTE:
The device does not record your activity data until
you start the timer.
Tips for Recording Activities
•
Charge the device before starting an activity (
Charging the
Device
, page 26
).
•
Select
to record laps.
•
Select
UP
or
DOWN
to view additional data pages.
Introduction
1
-t, majd válasszuk
a
Beállítások
>
Biztonság és követés
>
Csoport követés
>
Térképen
mutat
pontot, ezzel engedélyezzük, hogy a térképen megjelenjenek a
csatlakozó készülékek.
4.
A Garmin Connect alkalmazás beállítási menüjében válasszuk az
Bizton-
ság és követés
>
Élő követés
>
Csoport követés
pontot.
5.
Amennyiben több kompatibilis készülékkel is rendelkezünk, válasszuk ki,
hogy melyiket kívánjuk megjeleníteni a csoport követésben.
6.
Válasszuk a
Látható
>
Összes csatlakozó
pontot.
7.
Válasszuk az
Élő követés indítása
pontot.
8.
A Forerunner készüléken kezdjük el a tevékenységet.
9.
A csatlakozók megtekintéséhez léptessünk a térképre.
A csoport követés használatát segítő tippek
A csoport követés az élő követés funkció segítségével a csoportba tarto
-
zó sportolók helyzetének a térképen történő megjelenítését teszi lehetővé.
A csoport összes tagjának a Garmin Connect fiókkunkban ismerősnek kell
lennie
• Szabadtéren kerékpározzunk GPS-vétel mellett.
• Bluetooth-kapcsolaton keresztül párosítsuk a Forerunner készüléket
okostelefonunkkal.
• A Garmin Connect alkalmazás beállítási menüjében a
Kapcsolatok
pont
-
ra kattintva frissítsük a csoport követési menetbe tartozó kerékpárosok
listáját.
• Ellenőrizzük, hogy a csoporttagok mindegyike párosítsa okostelefonját,
és a Garmin Connect alkalmazásban indítson el egy élő követés me
-
netet.
• Ellenőrizzük, hogy az összes csatlakozó kerékpáros hatósugáron belül
legyen (40 km-en belül).
• Csoport követési menet alatt váltsunk a térkép képernyőre, ugyanis itt
láthatjuk a kapcsolódó kerékpárosok helyzetét (
egyes tevékenységekhez, 31. oldal
Zene
A Forerunner eszközön számítógépünkről vagy külső szolgáltatótől is
tölthetünk le audio tartalmakat, és azokat akkor is hallgathatjuk, ha az
okostelefonunk nincs a közelben. A Garmin Connect és Garmin Express al
-
kalmazások segítségével számítógépünkre külső szolgáltatótól származó
audió tartalmakat tölthetünk le.
A zene vezérlést az okostelefonunkon vagy az eszközön tárolt zenék le
-
játszásának irányítására használhatjuk. Az eszközön tárolt audio tartalmak
meghallgatásához Bluetooth technológia segítségével fülhallgatót kell páro
-
sítanunk az eszközzel.
Csatlakozás külső szolgáltatóhoz
Mielőtt az eszközre támogatott külső szolgáltatótól zenét vagy egyéb audió
fájlokat tölhetnénk le, csatlakoztatnunk kell a Garmin Connect alkalmazással.
1.
A GarminConnect alkalmazásban válasszuk a
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect
™
Mobile app,
instead of from the Bluetooth settings on your smartphone.
1
From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2
Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP:
You can hold , and select
Phone
>
Status
>
Pair
Phone
to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices
>
Add Device
, and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1
Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2
Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
Á
.
5
Align the tabs on the back of the device with the bike mount
notches
Â
.
6
Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1
Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE:
The device will not charge when outside the approved
temperature range (
Edge Specifications
, page 10
).
1
Pull up the weather cap
À
from the USB port
Á
.
Introduction
1
vagy
Introduction
WARNING
See the
Important Safety and Product Information
guide in the
product box for product warnings and other important
information.
Always consult your physician before you begin or modify any
exercise program.
Keys
À
Select to wake the device.
Hold to turn the device on and off.
Á
Select to scroll through the data screens, options, and
settings.
From the home screen, hold to view the device menu.
Â
Select to scroll through the data screens, options, and
settings.
From the home screen, select to view the widgets.
Ã
Select to start and stop the timer.
Select to choose an option or to acknowledge a message.
Ä
Select to mark a new lap.
Select to return to the previous screen.
Status Icons
A solid icon means the signal was found or the sensor is
connected.
GPS status
Bluetooth
®
status
Heart rate status
Power status
LiveTrack status
Speed and cadence status
Pairing Your Smartphone
To use the connected features of the Edge device, it must be
paired directly through the Garmin Connect
™
Mobile app,
instead of from the Bluetooth settings on your smartphone.
1
From the app store on your smartphone, install and open the
Garmin Connect Mobile app.
2
Hold to turn on the device.
The first time you turn on the device, you will select the
device language. The next screen prompts you to pair with
your smartphone.
TIP:
You can hold , and select
Phone
>
Status
>
Pair
Phone
to manually enter pairing mode.
3
Select an option to add your device to your Garmin Connect
account:
• If this is the first device you have paired with the Garmin
Connect Mobile app, follow the on-screen instructions.
• If you have already paired another device with the Garmin
Connect Mobile app, from the or menu, select
Garmin Devices
>
Add Device
, and follow the on-screen
instructions.
After you pair successfully, a message appears, and your device
syncs automatically with your smartphone.
Installing the Standard Mount
For the best GPS reception, position the bike mount so the front
of the device is oriented toward the sky. You can install the bike
mount on the stem or the handlebars.
1
Select a secure location to mount the device where it does
not interfere with the safe operation of your bike.
2
Place the rubber disk
À
on the back of the bike mount.
The rubber tabs align with the back of the bike mount so it
stays in place.
3
Place the bike mount on the bike stem.
4
Attach the bike mount securely using the two bands
Á
.
5
Align the tabs on the back of the device with the bike mount
notches
Â
.
6
Press down slightly and turn the device clockwise until it
locks into place.
Releasing the Edge
1
Turn the Edge clockwise to unlock the device.
2
Lift the Edge off the mount.
Charging the Device
NOTICE
To prevent corrosion, thoroughly dry the USB port, the weather
cap, and the surrounding area before charging or connecting to
a computer.
The device is powered by a built-in lithium-ion battery that you
can charge using a standard wall outlet or a USB port on your
computer.
NOTE:
The device will not charge when outside the approved
temperature range (
Edge Specifications
, page 10
).
1
Pull up the weather cap
À
from the USB port
Á
.
Introduction
1
pontot.
2.
Lépjünk a
Garmin eszközök
pontra, majd válasszuk ki az eszközünket.
3.
Válasszuk a
Zene
pontot.
4.
Válasszunk az elérhető lehetőségek közül:
• Telepített szolgáltatóhoz történő csatlakozáshoz válasszunk egy külső
szolgáltatót, és kövessük a képernyőn megjelenő utasításokat.
• Új szolgáltatóhoz való csatlakozáshoz válasszuk a
Get Music Apps
(Zenés alkalmazások keresése), válasszunk egy szolgáltatót, majd kö
-
vessük a képernyőn megjelenő utasításokat.
Spotify
®
A Spotify egy digitális zenei szolgáltatás, amely több millió dalhoz biztosít
hozzáférést.
TIPP!
A Spotify használatához először telepítenünk kell a Spotify alkalma
-
zást az okostelefonunkra. Kompatibilis digitális mobileszköz és prémium elő
-
fizetés szükséges, ahol ez elérhető. Forduljunk a Garmin ügyfélszolgálathoz
).
