Connecting an Auxiliary Device
You can connect various auxiliary devices to the stereo. These devices have either RCA connectors, a line
output, or a headphone output jack.
1 Locate the auxiliary connectors on the wiring harness.
2 If necessary, connect an RCA-to-3.5 mm adapter cable to the auxiliary device.
3 Connect the auxiliary device to the AUX IN RCA connectors on the wiring harness.
4 Select the Aux source.
Optical Audio Connection
You can connect devices with an optical audio output to the stereo using an optical audio cable. Televisions,
DVD players, CD players, and other devices may supply digital optical audio output.
This stereo supports PCM audio only. You may have to change the settings on your device to output PCM audio.
NOTE: Because streaming audio over the Fusion PartyBus network introduces a slight delay, streaming content
from a television or DVD player may not be ideal. You can disable Optical as a streaming source in the settings,
if needed (
).
SiriusXM Satellite Radio
Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including
commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world
of satellite radio. A SiriusXM Vehicle Tuner and subscription are required. For more information, go to
Setting the Tuner Region for the SiriusXM Source
You must set the stereo to use the USA tuner region before you can listen to SiriusXM Satellite Radio.
1 Select
> SETTINGS.
2 Select the name of the stereo.
3 Select TUNER REGION > USA.
Locating the SiriusXM Radio ID
You must have the radio ID of your SiriusXM Connect Tuner before you can activate your SiriusXM subscription.
You can locate the SiriusXM Radio ID on the back of the SiriusXM Connect Tuner or its packaging, or by tuning
your stereo to channel 0.
With the SiriusXM source selected, select
> SiriusXM > CHANNELS > ALL CHANNELS > 000 RADIO ID.
The SiriusXM Radio ID does not include the letters I, O, S, or F.
Activating a SiriusXM Subscription
1 With the SiriusXM source selected, tune to channel 1.
You should be able to hear the preview channel. If not, check the SiriusXM Connect Tuner and antenna
installation and connections, and try again.
2 Tune to channel 0 to locate the Radio ID.
3 Contact SiriusXM listener care by phone at (866) 635-2349 or go to
to
subscribe in the United States. Contact SiriusXM by phone at (877) 438-9677 or go to
to subscribe in Canada.
4 Provide the Radio ID.
The activation process usually takes 10 to 15 minutes, but can take up to an hour. For the SiriusXM Connect
Tuner to receive the activation message, it must be turned on and receiving the SiriusXM signal.
5 If the service is not activated within the hour, go to
http://care.siriusxm.com/refresh
or contact SiriusXM
Listener Care by phone at 1-866-635-2349.
Connecting an Auxiliary Device
15
