Remote Control Operation
LED power on (
Turning the LEDs On and Off, page 4
)
LED power off
LED color-selection wheel (
Changing the Color of the LEDs, page 5
Light: activates when the remote sends a signal to the receiver
LED brightness (
Changing the Brightness of the LEDs, page 5
LED mode speed (
Changing the Speed of a Display Mode Pattern, page 6
)
LED display mode (
Changing the Display Mode of the LEDs, page 5
1 2 3 Remote control receiver selection (
Pairing Additional Receivers to the Remote, page 6
Turning the LEDs On and Off
After you connect the remote control receiver to the speaker LEDs, you must use the remote control to turn the
LEDs on and off.
1 If you installed more than one receiver, press the group number to select the receiver to control (
Additional Receivers to the Remote, page 6
).
2 Press .
The LEDs connected to the receiver turn on with the same color and mode settings applied before the last
time you turned them off.
3 Press to turn off the LEDs connected to the receiver.
4
Wireless RGB LED Remote Control Instructions
