190-00663-00 Rev. A
Garmin G1000 Pilot’s Guide for the Beechcraft C90A/GT
4-10
AUDIO PANEL AND CNS
AUTO-TUNING FROM THE MFD
Frequencies can be automatically loaded into the COM Frequency Box from pages in the NRST or WPT
page group by highlighting the frequency and pressing the
ENT
Key (Figures 4-9, 4-10, and 4-11).
Auto-tuning a COM frequency from the WPT and NRST Pages:
1)
From any page that the COM frequency can be auto-tuned, activate the cursor by pressing the
FMS
Knob on
the MFD control unit or selecting the appropriate softkey.
2)
Turn the
FMS
Knob to place the cursor on the desired COM frequency (Figure 4-11).
3)
Press the
ENT
Key to load the COM frequency into the standby field of the selected COM radio.
4)
Press the
Frequency Transfer
Key on either PFD to transfer the frequency to the COM Active Frequency
Field.
Figure 4-9 Frequency Auto-Tuning from the MFD
Press the
ENT
Key to Load a
Highlighted Frequency into the
COM Standby Frequency Box.
Turn the
FMS
Knob to Scroll
Through a List
of Frequencies.
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
