Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
190-00663-00 Rev. A
5-46
FLIGHT MANAGEMENT
Renaming user waypoints:
1)
Highlight a user waypoint in the User Waypoint List. Press the
RENAME
Softkey, or press the
MENU
Key and
select ‘Rename User Waypoint’
2)
Enter a new name.
3)
Press the
ENT
Key. The message ‘Do you want to rename the user waypoint AAAAAA to BBBBBB?’ is
displayed.
4)
With ‘YES’ highlighted, press the
ENT
Key.
5)
Press the
FMS
Knob to remove the flashing cursor.
Changing the location of an existing waypoint to the aircraft present position:
1)
Enter a waypoint name or select the waypoint in the User Waypoint List, then press the
ENT
Key.
2)
Press the
MENU
Key.
3)
Select ‘Use Present Position’.
4)
Press the
ENT
Key twice. The new waypoint’s location is saved.
5)
Press the
FMS
Knob to remove the flashing cursor.
A system generated comment for a user waypoint incorporates the reference waypoint identifier, bearing,
and distance. If a system generated comment has been edited, a new comment can be generated.
Resetting the comment field to the system generated comment:
1)
Enter a waypoint name or select the waypoint in the User Waypoint List, then press the
ENT
Key.
2)
Press the
MENU
Key.
3)
Select ‘Auto Comment’.
4)
Press the
ENT
Key. The generated comment is based on the reference point used to define the waypoint.
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
