190-00663-00 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
5-65
FLIGHT MANAGEMENT
Creating and adding user waypoints to the active flight plan:
1)
Press the
Joystick
to activate the panning function on the Active Flight Plan Page and pan to the map location
of the desired user waypoint.
2)
Select the
LD WPT
Softkey; or press the
MENU
Key, select ‘Load Waypoint’, and press the
ENT
Key. The user
waypoint is created with a name of USRxxx (using the next available in sequence) and is added to the end of
the active flight plan.
ADDING AIRWAYS TO A FLIGHT PLAN
Airways can be added to the active flight plan or any stored flight plan. Choose a flight plan (add the desired
airway entry point if not already in the flight plan), select the waypoint after the desired airway entry point,
select the airway, and it is added in front of the selected waypoint. An airway can only be loaded if there is a
waypoint in the flight plan that is part of the desired airway and is not part of an arrival or approach procedure.
The G1000 also anticipates the desired airway and exit point based on loaded flight plan waypoints.
Figure 5-59 Select Airway Page - Selecting Airway
Airway Entry Waypoint
Selected Airway
Airways Available at TOP
Airway Waypoint
Sequence
Preview of
Selected Airway
Adding an airway to a flight plan:
1)
Press the
FPL
Key.
2)
Press the
FMS
Knob to activate the cursor (not required on the PFD).
3)
Turn the large
FMS
Knob to highlight the waypoint after the desired airway entry point.
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
