190-00663-00 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
6-75
HAZARD AVOIDANCE
TRAFFIC MAP PAGE
The Traffic Map Page is specialized to show surrounding TIS traffic data in relation to the aircraft’s current
position and altitude, without clutter from the basemap. Aircraft orientation on this map is always heading up
unless there is no valid heading. Map range is adjustable with the
RANGE
Knob
from 2 to 12 nm, as indicated
by the map range rings.
The traffic mode is annunciated in the upper left corner of the Traffic Map Page. When the aircraft is on the
ground, TIS automatically enters Standby Mode. Once the aircraft is airborne, TIS switches from Standby to
Operating Mode and the G1000 begins to display traffic information. Refer to the System Status discussion for
more information.
Displaying traffic on the Traffic Map Page:
1)
Turn the large
FMS
Knob to select the Map Page Group.
2)
Turn the small
FMS
Knob to select the Traffic Map Page.
3)
Confirm TIS is in Operating Mode:
Select the
OPERATE
Softkey to begin displaying traffic.
Or
:
1)
Press the
MENU
Key.
2)
Select Operate Mode (shown if TIS is in Standby Mode) and press the
ENT
Key.
Display
of System
Status
Figure 6-82 Traffic Map Page - Advisories
Non-Threat
Traffic
Non-Threat
Traffic
Proximity
Advisory, 1700’
Above and
Descending
Traffic Advisory,
Off Scale Aircraft
is Out of Range,
200’ Above and
Descending
Traffic Advisory, Aircraft
is 400’ Below and
Climbing
Non-Bearing Traffic (System is Unable to
Determine Bearing), Aircraft Distance is 8.0
nm, 1100’ Above and Descending
Operating
Mode
Mutes “TIS Not
Available” Voice
Alert
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
