Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
190-00663-00 Rev. A
7-44
AFCS
APPROACH
Flying an ILS approach:
1)
Transition from GPS Navigation Mode to Heading Select Mode.
a)
Select the Runway 35L ILS approach for KCOS and select ‘VECTORS’ for the transition. Load and activate the
approach into the flight plan.
b)
Use the
HDG
Knob to set the Selected Heading after getting vectors from ATC.
c)
Press the
HDG
Key. The autopilot turns the aircraft to the desired heading.
d)
Use Heading Select Mode to comply with ATC vectors as requested.
2)
Arm LOC Approach and Glideslope modes.
a)
Ensure the appropriate localizer frequency is tuned.
b)
Press the
APR
Key when cleared for approach to arm Approach and Glideslope modes. ‘LOC’ and ‘GS’ appear
in white as armed mode annunciations.
c)
The navigation source automatically switches to LOC. After this switch occurs, the localizer signal can be captured
and the flight director determines when to begin the turn to intercept the final approach course. The flight
director now provides guidance to the missed approach point.
3)
There are two options available at this point, as the autopilot flies the ILS approach:
• Push the
AP/YD DISC
Switch at the decision
height and land the aircraft.
• Use the
GA
Switch to execute a missed approach.
Figure 7-43 ILS Approach to KCOS
HDG Mode
LOC
A
PR/
G
S
M
ode
PETEY
1
2
3
GPS NA
V Mode
KCOS
PYNON
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
