Garmin G1000 Pilot’s Guide for the Beechcraft C90A/GT
190-00663-00 Rev. A
8-54
ADDITIONAL FEATURES
PRESETS
Up to 15 channels from any category can be assigned a preset number. The preset channels are selected by
selecting the
PRESETS
and
MORE
Softkeys. Then the preset channel can be selected directly and added to
the channel list for the Presets category.
Setting a preset channel number:
1)
On the XM Radio Page, while listening to an Active Channel that is wanted for a preset, select the
PRESETS
Softkey to access the first five preset channels (
PS1 - PS5
).
2)
Select the
MORE
Softkey to access the next five channels (
PS6 – PS10
), and again to access the last five
channels (
PS11 – PS15
). Selecting the
MORE
Softkey repeatedly cycles through the preset channels.
3)
Select any one of the (
PS1 - PS15
) softkeys to assign a number to the active channel.
4)
Select the
SET
Softkey on the desired channel number to save the channel as a preset.
Figure 8-60 Accessing and Selecting XM Preset Channels
Select
PRESETS
to
Access the Preset
Channels Softkeys
Select
MORE
to Cycle
Through the Preset
Channels
Select
SET
to Save Each
Preset Channel
Selecting the
BACK
Softkey, or waiting during 45 seconds of softkey inactivity, returns the system to the top
level softkeys.
VOLUME
Radio volume is shown as a percentage. Volume level is controlled by selecting the
VOL
Softkey, which
brings up the
MUTE
Softkey and the volume increase and decrease softkeys.
Adjusting the volume:
1)
With the XM Radio Page displayed, select the
VOL
Softkey.
2)
Select the
VOL –
Softkey to reduce volume or select the
VOL +
Softkey to increase volume. (Once the
VOL
Softkey is selected, the volume can also be adjusted using the small
FMS
Knob.)
3)
Select the
MUTE
Softkey to mute the audio. Select the
MUTE
Softkey again to unmute the audio.
Figure 8-61 Volume Control
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
