Garmin G1000 Pilot’s Guide for the Beechcraft C90A/GT
190-00663-00 Rev. A
8-55
ADDITIONAL FEATURES
8.5 SCHEDULER
The Scheduler feature can be used to enter and display reminder messages (e.g., Hot Section Inspection or
Phase 1 Maintenance Check) in the Alerts Window on the PFD. Messages can be set to display based on a specific
date and time (event), once the message timer reaches zero (one-time; default setting), or recurrently whenever
the message timer reaches zero (periodic). Message timers set to periodic alerting automatically reset to the
original timer value once the message is displayed. When power is cycled, messages are retained until deleted,
and message timer countdown is restarted.
Figure 8-62 Scheduler (Utility Page)
Entering a scheduler message:
1)
Select the AUX - Utility Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to
highlight the first empty scheduler message naming field.
4)
Use the
FMS
Knob to enter the message text to be displayed in the Alerts Window and press the
ENT
Key.
5)
Press the
ENT
Key again or use the large
FMS
Knob to move the cursor to the field next to Type.
6)
Turn the small
FMS
Knob to select the message alert type:
• Event—Message issued at the specified date/time
• One-time—Message issued when the message timer reaches zero (default setting)
• Periodic—Message issued each time the message timer reaches zero
7)
Press the
ENT
Key again or use the large
FMS
Knob to move the cursor to the next field.
8)
For periodic and one-time messages, use the
FMS
Knob to enter the timer value (HH:MM:SS) from which to
countdown and press the
ENT
Key.
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
