190-00663-00 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
1-44
SYSTEM OVERVIEW
Figure 1-40 Timers (MFD AUX - Utility Page)
The flight timer can be set to count up from zero starting at system power-up or from the time that the
aircraft lifts off; the timer can also be reset to zero at any time.
Setting the flight timer starting criterion
1)
Use the
FMS
Knob to select the AUX - Utility Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to
highlight the field next to the flight timer.
4)
Turn the small
FMS
Knob to select the starting criterion (PWR-ON or IN-AIR) and
pr
ess the
ENT
Key.
Resetting the flight timer
1)
Use the
FMS
Knob to select the AUX - Utility Page.
2)
Press the
MENU
Key.
3)
With
‘Reset Flight Timer’ highlighted, press the
ENT
Key.
The G1000 records the time at which departure occurs, depending on whether the pilot prefers the time
to be recorded from system power-up or from aircraft lift off. The displayed departure time can also be reset
to display the current time at the point of reset. The format in which the time is displayed is controlled
from the System Setup Page.
Setting the departure timer starting criterion
1)
Use the
FMS
Knob to select the AUX - Utility Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to
highlight the field next to the departure time.
4)
Turn the small
FMS
Knob to select the starting criterion (PWR-ON or IN-AIR) and
pr
ess the
ENT
Key.
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
