Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
190-00663-00 Rev. A
2-6
FLIGHT INSTRUMENTS
Changing Vspeeds and turning Vspeed flags on/off:
1)
Press the
TMR/REF
Softkey.
2)
Turn the large
FMS
Knob to highlight the desired Vspeed.
3)
Use the small
FMS
Knob to change the Vspeed in 1-kt increments (when a speed has been changed from a
default value, an asterisk appears next to the speed).
4)
Press the
ENT
Key or turn the large
FMS
Knob to highlight the ON/OFF field
5)
Turn the small
FMS
Knob clockwise to ON or counterclockwise to OFF.
6)
To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
Figure 2-7 Takeoff and Landing Vspeeds
(Timer/References Window)
Vspeed flags can be turned on or off and values restored all at once or by category (takeoff and landing).
Modifying Vspeeds (on, off, restore defaults):
1)
Press the
TMR/REF
Softkey.
2)
Press the
MENU
Key.
3)
Turn the
FMS
Knob to highlight the desired selection.
4)
Press the
ENT
Key.
5)
To remove the window, press the
CLR
Key or the
TMR/REF
Softkey.
Figure 2-8 Page Menu
(Timer/References Window)
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...