190-00663-00 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
2-15
FLIGHT INSTRUMENTS
Navigation angles (track, heading, course, bearing) are corrected to the computed magnetic variation (‘Mag
Var’) or referenced to true north (denoted ‘T’), set on the AUX - System Setup Page. When an approach
referenced to true north has been loaded into the flight plan, the system generates a message to change the
navigation angle setting to ‘True’ at the appropriate time.
Figure 2-22 Heading and Course Indications (True)
Changing the navigation angle setting:
1)
Use the
FMS
Knob to select the AUX - System Setup Page on the MFD.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight ‘Nav Angle’ in the ‘Display Units’ box (Figure 2-23).
4)
Turn the small
FMS
Knob to highlight the desired setting and press the
ENT
Key.
•
TRUE - References angles to true north (denoted with ‘T’)
•
MAGNETIC - Angles corrected to the computed magnetic variation (‘Mag Var’)
Figure 2-23 System Setup Page, Navigation Angle Settings
Summary of Contents for G1000:Beechcraft Baron 58/G58
Page 1: ...Hawker Beechcraft C90A GT...
