190-00962-02 Rev A
Garmin G1000 Pilot’s Guide for the Diamond DA42NG
115
AUDIO PANEL AND CNS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Figure 4-35 Transponder Softkeys (PFD)
Pressing the
BACK
Softkey
returns to the top-level softkeys.
ALERTS
ALERTS
BACK
BKSP
IDENT
7
6
5
4
3
2
1
0
STBY
ON
ALT
VFR
CODE
IDENT
BACK
XPDR
IDENT
Pressing the
BACK
Softkey returns to the mode selection softkeys.
GND
TRANSPONDER MODE SELECTION
Mode selection can be automatic (Ground and Altitude Modes) or manual (Standby, ON, and Altitude Modes).
The
STBY
,
ON
,
and
ALT
Softkeys can be accessed by pressing the
XPDR
Softkey.
Selecting a transponder mode:
1)
Press the
XPDR
Softkey to display the Transponder Mode Selection Softkeys.
2)
Press the desired softkey to activate the transponder mode.
GROUND MODE
Ground Mode is normally selected automatically when the aircraft is on the ground. The transponder
powers up in the last mode it was in when shut down. Ground Mode can be overridden by pressing any one
of the Mode Selection Softkeys. A green GND indication and transponder code appear in the mode field of
the Transponder Data Box. In
Ground Mode, the transponder does not allow Mode A and Mode C replies,
but it does permit acquisition squitter and replies to discretely addressed Mode S interrogations.
When Standby Mode has been selected on the ground, the transponder can be returned to Ground Mode
by pressing the
GND
Softkey.
GND
Mode
Figure 4-36 Ground Mode
