190-00962-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42NG
173
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
USER WAYPOINTS
The G1000 can create and store up to 1,000 user-defined waypoints. User waypoints can be created from any
map page (except PFD Inset Map, AUX-Trip Planning Page, or Procedure Pages) by selecting a position on the
map using the
Joystick
, or from the User Waypoint Information Page by referencing a bearing/distance from
an existing waypoint, bearings from two existing waypoints, or latitude and longitude. Once a waypoint has
been created, it can be renamed, deleted, or moved. Temporary user waypoints are erased upon system power
down.
Figure 5-45 User Waypoint Information Page
Selected User
Waypoint
Navigation Map
Showing Selected
User Waypoint
User Waypoint List
- Identifier
- Comment
Softkeys
# User Wpts Used
GO BACK displayed if
User Wpt was created
on map page
User Wpt Comment
User Waypoint Info
- Identifier
- Temporary/Normal
- Waypoint Type
Reference Wpt/Info
- Identifier/Rad/Dist or
- Identifiers/Radials or
- Region/Lat/Long
Selecting a User Waypoint:
1)
With the User Waypoint Information Page displayed, enter the name of the User Waypoint, or scroll to the
desired waypoint in the User Waypoint List using the large
FMS
Knob.
2)
Press the
ENT
Key.
3)
Press the
FMS
Knob to remove the flashing cursor.
Or
:
1)
With the Nearest User Waypoints Page displayed, press the
FMS
Knob.
2)
Press the
ENT
Key or turn either
FMS
Knob to select an identifier in the Nearest USR Box.
3)
Press the
FMS
Knob to remove the flashing cursor.