background image

190-00962-02  Rev. A

Garmin G1000 Pilot’s Guide for the Diamond DA42NG

195

FLIGHT MANAGEMENT

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

ADDING WAYPOINTS TO AN EXISTING FLIGHT PLAN

Waypoints can be added to the active flight plan or any stored flight plan.  Choose the flight plan, select the 

desired point of insertion, enter the waypoint, and it is added in front of the selected waypoint.  Flight plans 
are limited to 99 waypoints (including waypoints within airways and procedures). If the number of waypoints 
in the flight plan exceeds 99, the message “Flight plan is full. Remove unnecessary waypoints.” appears and the 
new waypoint(s) are not added to the flight plan.

Figure 5-61  Stored Flight Plan Page

Stored Flight Plan Selected

 - Memory Slot

 - Comment

 - Procedure Identifier

 - Waypoint Identifier

 - Airway Identifier

 - Desired Track to Waypoint

 - Distance to Waypoint

 - Waypoint Altitude Constraint

Softkeys

Figure 5-62  Active Flight Plan Page - FPL Full

Flight Plan Full Message

Adding a waypoint to a stored flight plan:

1) 

On the Flight Plan Catalog Page, press the 

FMS

 Knob to activate the cursor.

2) 

Highlight the desired flight plan.

Summary of Contents for G1000 Diamond DA42NG





































































































































































































































































































































































































































































































































































































































































Reviews: