Garmin G1000 Pilot’s Guide for the Diamond DA42NG
190-00962-02 Rev. A
200
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
DEPARTURE (DP)
A Departure Procedure (DP) is loaded at the departure airport in the flight plan. Only one departure can
be loaded at a time in a flight plan. The route is defined by selection of a departure, the transition waypoints,
and a runway.
Figure 5-68 Departure Loading Page - Selecting the Departure
Departure Airport
Selected
Departure
Departures Available at
KMKC
Departure Waypoint
Sequence
Preview of
Selected
Departure
Loading a departure procedure into a stored flight plan:
1)
Select a stored flight plan from the Flight Plan Catalog Page.
2)
Select the
EDIT
Softkey; or press the
MENU
Key, select ‘Edit Flight Plan’, and press the
ENT
Key. The Stored
Flight Plan Page is displayed.
3)
Select the
LD DP
Softkey; or press the
MENU
Key, select “Load Departure”, and press the
ENT
Key. The
Departure Loading Page is displayed.
4)
Select a departure. Press the
ENT
Key.
5)
Select a runway served by the selected departure, if required. Press the
ENT
Key.
6)
Select a transition for the selected departure. Press the
ENT
Key.
7)
Press the
ENT
Key to load the selected departure procedure.
