Garmin G1000 Pilot’s Guide for the Diamond DA42NG
190-00962-02 Rev. A
230
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
ARRIVALS
A Standard Terminal Arrival (STAR) can be loaded at any airport that has one available. Only one arrival
can be loaded at a time in a flight plan. If an arrival is loaded when another arrival is already in the active
flight plan, the new arrival replaces the previous arrival. The route is defined by selection of an arrival, the
transition waypoints, and a runway.
LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN
Loading an arrival into the active flight plan using the
PROC
Key:
1)
Press the
PROC
Key. The Procedures Window is displayed.
2)
Highlight ‘SELECT ARRIVAL’.
3)
Press the
ENT
Key. The Arrival Loading Page is displayed.
4)
Use the
FMS
Knob to select an airport and press the
ENT
Key.
5)
Select an arrival from the list and press the
ENT
Key.
6)
Select a transition (if required) and press the
ENT
Key.
7)
Select a runway (if required) and press the
ENT
Key. ‘LOAD?’ is highlighted.
8)
Press the
ENT
Key to load the arrival procedure.
Figure 5-94 Arrival Selection
Destination Airport
Arrival Preview
Available Procedure Actions
Arrival Choices
Loaded Procedures
