190-00962-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42NG
29
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Using the
FMS
Knob to enter data:
1)
If needed, press the
FMS
Knob to activate the cursor.
2)
Use the large
FMS
Knob to highlight the desired field.
3)
Begin entering data.
a)
To quickly enter a waypoint identifier, turn the small
FMS
Knob counter-clockwise to display a list of waypoints
in the active flight plan (list is titled FPL). If desired, turn the small
FMS
Knob clockwise to scroll through lists
of nearest waypoints (NRST) and recently-entered waypoints (RECENT).
b)
Turn the large
FMS
Knob to highlight the desired waypoint from the list and press the
ENT
Key.
Or
:
a)
Turn the small
FMS
Knob to select a character for the first placeholder.
Turning the knob clockwise scrolls through the alphabet (where appropriate) toward the letter Z, starting at
K, and the digits zero through nine. Afterwards, turning the knob counter-clockwise scrolls in the opposite
direction.
b)
Use the large
FMS
Knob to move the cursor to the next placeholder in the field.
c)
Repeat, using the small
FMS
Knob to select a character and the large
FMS
Knob to move the cursor, until the
field is complete.
d)
Press the
ENT
Key to confirm entry.
4)
Press the
FMS
Knob or
CLR
Key to cancel data entry (the field reverts back to its previous information).
