Garmin G1000 Pilot’s Guide for the Diamond DA42NG
190-00962-02 Rev. A
38
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
6)
In the next field, use the small
FMS
Knob to select the desired settings upon which to base the new profile.
Profiles can be created based on Garmin factory defaults, default profile settings (initially based on Garmin
factory defaults unless edited by the pilot), or current system settings.
7)
Press the
ENT
Key.
8)
With ‘CREATE’ highlighted, press the
ENT
Key to create the profile
Or
:
Use the large
FMS
Knob to select ‘CREATE and ACTIVATE’ and press the
ENT
Key to activate the new profile.
9)
To cancel the process, select ‘CANCEL’ with the large FMS Knob and press the
ENT
Key.
Sel
ecting an active profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight the active profile field in the Pilot Profile Box.
4)
Turn the small
FMS
Knob to display the pilot profile list and highlight the desired profile.
5)
Press the
ENT
Key. The G1000 loads and displays the system settings for the selected profile.
Renaming a profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘RENAME’ in the Pilot Profile Box.
4)
Press the
ENT
Key.
5)
In the ‘Rename Profile’ window, turn the
FMS
Knob to select the profile to rename.
6)
Press the
ENT
Key.
7)
Use the
FMS
Knob to enter a new profile name up to 16 characters long and press the
ENT
Key.
8)
With ‘RENAME’ highlighted, press the
ENT
Key.
9)
To cancel the process, use the large
FMS
Knob to select ‘CANCEL’ and press the ENT Key.
Deleting a profile:
1)
Use the
FMS
Knob to select the AUX - System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight ‘DELETE’ in the Pilot Profile Box.
4)
Press the
ENT
Key.
5)
In the ‘Delete Profile’ window, turn the
FMS
Knob to select the profile to delete.
6)
Press the
ENT
Key.
7)
With ‘DELETE’ highlighted, press the
ENT
Key.
8)
To cancel the process, use the large
FMS
Knob to select ‘CANCEL’ and press the
ENT
Key.
