Garmin G1000 Pilot’s Guide for the Diamond DA42NG
190-00962-02 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
582
APPENDIX A
G1000 SYSTEM ANNUNCIATIONS
NOTE:
Upon power-up, certain windows remain invalid as G1000 equipment begins to initialize. All windows
should be operational within one minute of power-up. If any window continues to remain flagged, the
G1000 System should be serviced by a Garmin-authorized repair facility.
When an LRU or an LRU function fails, a large red ‘X’ is typically displayed on windows associated with the
failed data (refer to Figure B-1 for all possible flags and the responsible LRUs). Refer to the Airplane Flight
Manual (AFM) for additional information regarding pilot responses to these annunciations.
Figure A-5 G1000 System Failure Annunciations
GDC 74A
GRS 77,
GMU 44 or
GIA 63/63W
GIA 63/63W
GIA 63/63W
GIA 63/63W
or DME/ADF
Source
GEA 71,
GIA 63/63W,
or ECU
GDC 74A
GTX 33 or GIA 63/63W
GIA 63/63W
Database
Mismatch in
PFD and MFD
The status of detected LRUs can be checked on the AUX - System Status Page (Figure A-2). Active LRUs
are indicated by green check marks; failed, by red ‘X’s. Failed LRUs should be noted and a service center or
Garmin-authorized dealer informed.
Viewing LRU information:
1)
Use the
FMS
Knob to select the AUX - System Status Page.
2)
To place the cursor in the ‘LRU Info’ Box,
a)
Select the
LRU
Softkey.
Or
:
a)
Press the
MENU
Key.
b)
With ‘Select LRU Window’ highlighted, press the
ENT
Key.
3)
Use the
FMS
Knob to scroll through the box to view LRU status information.