190-00962-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42NG
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
589
APPENDIX A
Message Advisory
Comments
AHRS1 GPS
– AHRS1 operating
exclusively in no-GPS mode.
The #1 AHRS is operating exclusively in no-GPS mode. The G1000 system should be
serviced.
AHRS1 SRVC
– AHRS1 Magnetic-field
model needs update.
The #1 AHRS earth magnetic field model is out of date. Update magnetic field model
when practical.
GEO LIMITS
– AHRS1 too far North/
South, no magnetic compass.
The aircraft is outside geographical limits for approved AHRS operation. Heading is
flagged as invalid.
MANIFEST
– GRS1 software
mismatch, communication halted.
The #1 AHRS has incorrect software installed. The G1000 system should be serviced.
GDL 69/69A SATELLITE DATALINK RECEIVER
Message Advisory
Comments
GDL69 CONFIG
– GDL 69 config
error. Config service req’d.
GDL 69 configuration settings do not match those of backup configuration memory.
The G1000 system should be serviced.
GDL69 FAIL
– GDL 69 has failed.
A failure has been detected in the GDL 69. The receiver is unavailable. The G1000
system should be serviced.
MANIFEST
– GDL software mismatch,
communication halted.
The GDL 69 has incorrect software installed. The G1000 system should be serviced.
GTX 33 TRANSPONDER
Message Advisory
Comments
XPDR1 CONFIG
– XPDR1 config error.
Config service req’d.
The transponder configuration settings do not match those of backup configuration
memory. The G1000 system should be serviced.
MANIFEST
– GTX1 software
mismatch, communication halted.
The transponder has incorrect software installed. The G1000 system should be
serviced.
XPDR1 SRVC
– XPDR1 needs service.
Return unit for repair.
The #1 transponder should be serviced when possible.
XPDR1 FAIL
– XPDR1 is inoperative.
There is no communication with the #1 transponder.
GDC 74A AIR DATA COMPUTER
Message Advisory
Comments
MANIFEST
– GDC1 software
mismatch, communication halted.
The GDC 74A has incorrect software installed. The G1000 system should be serviced.
ADC1 ALT EC
– ADC1 altitude error
correction is unavailable.
GDC1 is reporting that the altitude error correction is unavailable.
ADC1 AS EC
– ADC1 airspeed error
correction is unavailable.
GDC1 is reporting that the airspeed error correction is unavailable.
