190-00962-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42NG
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
597
APPENDIX B
3)
Turn the G1000 system ON. A prompt similar to the following illustration is displayed:
Figure B-1 Navigation Database Load Prompt
4)
Press the
YES
Softkey to update the navigation database in the MFD.
5)
After the update completes, press any key. The display starts in normal mode.
Figure B-2 Database Update Confirmation
6)
Turn the G1000 system OFF and remove the SD card from the top card slot.
7)
Repeat steps 2 through 6 for the PFD
8)
Apply power to the system and press the
ENT
Key to acknowledge the startup screen.
9)
Turn the large
FMS
Knob to select the AUX Page group on the MFD.
10)
Turn the small
FMS
Knob to select the System Status Page.
11)
Press the Display Database Selection Softkey to show navigation database information for each display