190-00962-02 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA42NG
57
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Navigation angles (track, heading, course, bearing) are corrected to the computed magnetic variation (Mag
Var) or referenced to true north (T), set on the AUX - System Setup Page. When an approach referenced to
true north has been loaded into the flight plan, the system generates a message to change the navigation angle
setting to True at the appropriate time.
Figure 2-14 Heading and Course Indications (True)
Changing the navigation angle true/magnetic setting:
1)
Use the
FMS
Knob to select the AUX - System Setup Page on the MFD.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight Nav Angle in the Display Units box.
4)
Turn the small
FMS
Knob to highlight the desired setting and press the
ENT
Key.
•
TRUE - References angles to true north (T)
•
MAGNETIC - Angles corrected to the computed magnetic variation (Mag Var)
Figure 2-15 Navigation Angle Settings
(AUX - System Setup Page)
