190-01895-00 Rev. A
Garmin G1000 Pilot’s Guide for the Diamond DA62
333
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
At the completion of a successful weather data request, the Request Status Window (if still open) indicates
‘OK’. Refer to the Abnormal Operations discussion later in this section for more information on the messages
received if the request is unsuccessful.
Cancelling a Connext Weather Data Request in Progress:
1)
Select the Weather Data Link (CNXT) Page.
2)
Press the
MENU
Key.
3)
With ‘Connext Data Request’ highlighted, press the
ENT
Key.
4)
Turn the large
FMS
Knob to select ‘CANCEL REQ’ and press the
ENT
Key. The request status box indicates
‘Request Cancelled’.
5)
Press the
FMS
Knob to return to the Weather Data Link (CNXT) Page.
The pilot can schedule Connext Data Requests to recur automatically. Auto requests remain enabled until
the pilot disables them, or the system power is cycled. The Request Status Window will indicate the number of
minutes or seconds until the next automatic data request occurs.
NOTE:
If automatic Connext Data Requests were enabled prior to the system entering Reversionary Mode,
the automatic weather data requests will continue in Reversionary Mode, however the Connext Data
Request Window and its associated options will not be available.
Enabling/disabling automatic Connext Data Requests:
1)
Select the Weather Data Link (CNXT) Page.
2)
Press the
MENU
Key.
3)
With ‘Connext Data Request’ highlighted, press the
ENT
Key.
4)
Choose the desired weather coverage options.
5)
Turn the large
FMS
Knob to select the ‘UPDATE RATE’ setting. Then turn the small
FMS
Knob to highlight the
desired automatic update frequency (OFF, 5 Min, 10 Min, 15 Min, 20 Min, 30 Min, 45 Min, or 60 Min), then
press the
ENT
Key.
6)
The ‘SEND REQ” button is highlighted and a timer is displayed in the ‘REQUEST STATUS’ based on the currently
selected update rate. Press the
ENT
Key to immediately send an immediate Connext Data Request.
Or
:
Press the
FMS
Knob to return to the Weather Data Link (CNXT) Page.
