Garmin G1000 Pilot’s Guide for the Diamond DA62
190-01895-00 Rev. A
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
570
APPENDIX A
G1000 SYSTEM ANNUNCIATIONS
NOTE:
Upon power-up, certain windows remain invalid as G1000 equipment begins to initialize. All windows
should be operational within one minute of power-up. If any window continues to remain flagged, the
G1000 System should be serviced by a Garmin-authorized repair facility.
When an LRU or an LRU function fails, a large red ‘X’ is typically displayed on windows associated with the
failed data (refer to Figure B-1 for all possible flags and the responsible LRUs). Refer to the Airplane Flight
Manual (AFM) for additional information regarding pilot responses to these annunciations.
Figure A-5 G1000 System Failure Annunciations
GDC 74A
GRS 77,
GMU 44 or
GIA 63W
GIA 63W
GIA 63W
GIA 63W
or DME/ADF
Source
GEA 71,
GIA 63W,
or ECU
GDC 74A
GTX 33 or GIA 63W
GIA 63W
Database
Mismatch in
PFD and MFD
The status of detected LRUs can be checked on the AUX - System Status Page (Figure A-2). Active LRUs
are indicated by green check marks; failed, by red ‘X’s. Failed LRUs should be noted and a service center or
Garmin-authorized dealer informed.
Viewing LRU information:
1)
Use the
FMS
Knob to select the AUX - System Status Page.
2)
To place the cursor in the ‘LRU Info’ Box,
a)
Select the
LRU
Softkey.
Or
:
a)
Press the
MENU
Key.
b)
With ‘Select LRU Window’ highlighted, press the
ENT
Key.
3)
Use the
FMS
Knob to scroll through the box to view LRU status information.
