Page B-24
G1000 Nav III Line Maintenance Manual
Rev.L
190-00352-00
B.2
Final Configuration Items
B.2.1 Aircraft Registration Number Entry
1.
Select the GTX page group, then select the TRANSPONDER CONFIGURATION page using the small
FMS knob on the PFD.
2.
Ensure that the ‘ADDRESS TYPE’ is ‘US TAIL’ under the ‘SET’ and ‘ACTIVE’ columns.
3.
Activate the cursor and highlight the ‘ADDRESS’ field. Use the small/large FMS knobs to enter the
aircraft registration number.
4.
Once the correct registration number is entered, press the ENT key. The transponder is configured:
5.
The transponder then alerts the technician of complete configuration:
6.
Press the ENT key on the PFD and deactivate the cursor.
NOTE
To enter a non-US Mode-S registration number set the ‘ADDRESS TYPE’ to ‘HEX ID’ and
enter the Mode-S registration number in the ‘ADDRESS’ field. Ensure the ‘FLIGHT ID TYPE’
is set to ‘CONFIG ENTRY’ or ‘PFD ENTRY’. The CONFIG ENTRY allows the Aircraft
Registration/ID number to be entered once and stored in memory by entering the Registration/ID
number in the ‘FLIGHT ID’ field. PFD ENTRY allows the pilot to enter the Registration/ID
number from the PFD, via the ‘TMR/REF’ softkey.
Summary of Contents for G1000 NAV III
