G1000 Nav III Line Maintenance Manual
Page 2-43
190-00352-00
Rev.
L
2.4
GIA 63/63W
2.4.1
Configuration Pages
2.4.1.1
RS-232/ARINC 429 Page
Figure 2-14. RS-232/ARINC 429
Main ARINC 429 and RS-232 communications channels for GIA 1 and GIA 2 are shown at this page. All
settings are pre-established for a particular installation and are loaded from the G1000 Loader Card and should
not be changed. The ‘GIA 1’ and ‘GIA 2’ configuration files contain the settings shown on this page.
SELECT UNIT
This window shows the currently selected GIA 63/GIA 63W unit.
RS-232
This window shows active RS-232 configuration settings for currently selected GIA.
ARINC 429
This window shows active ARINC 429 configuration settings for currently selected GIA.
SOFTKEYS
The following softkeys appear at this page:
•
SET>ACTV: See Section 1.4.12 for description.
•
ACTV>SET: See Section 1.4.12 for description.
•
CLR NV: Clears all ‘Active’ settings from memory from the selected GIA 63/GIA 63W and restores
default settings.
You will need to reload GIA and optional equipment configuration files if you clear the
memory.
Summary of Contents for G1000 NAV III
