Garmin G1000 NXi Cockpit Reference Guide for the da62
190-02622-00 Rev. A
4
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight Instruments
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
Selecting bearing display and changing sources:
1)
Press the
PFd opt
Softkey.
2)
Press either
Bearing 1
or
Bearing 2
Softkey to display the desired bearing pointer and
information window with a NAV source.
3)
Press either
Bearing 1
or
Bearing 2
Softkey again to change the bearing source to GPS.
4)
Press either
Bearing 1
or
Bearing 2
Softkey a third time to change the bearing source to
ADF.
5)
To remove the bearing pointer and information window, press either
Bearing 1
or
Bearing 2
Softkey again.
displaying the dME Information Window:
1)
Press the
PFd opt
Softkey.
2)
Press the
dME
Softkey to display the ‘DME Information’ Window above the ‘BRG1
Information’ Window.
3)
To remove the ‘DME Information’ Window, press the
dME
Softkey again.
CoURSE dEVIaTIoN INdICaToR (CdI)
Changing navigation sources:
1)
Press the
CdI
Softkey to change from GPS to VOR1 or LOC1. This places the cyan tuning
box over the NAV1 standby frequency in the upper left corner of the PFD.
2)
Press the
CdI
Softkey again to change from VOR1 or LOC1 to VOR2 or LOC2. This places
the cyan tuning box over the NAV2 standby frequency.
3)
Press the
CdI
Softkey a third time to return to GPS.
Changing the selected GPS CdI setting:
1)
Use the
FMS
Knob to select the ‘Aux - System Setup 1’ Page on the MFD.
2)
Push the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight Selected in the GPS CDI box.
4)
Turn the small
FMS
Knob to highlight the desired setting and press the
ENT
Key.
5)
To cancel the selection, press the
FMS
Knob or the
CLR
Key.
Enabling/disabling oBS Mode while navigating a GPS flight plan:
1)
Press the
oBS
Softkey to select OBS Mode.
2)
Turn the
CRS
Knob to select the desired course to/from the waypoint. Push the
CRS
Knob to synchronize the Selected Course with the bearing to the next waypoint.
3)
Press the
oBS
Softkey again to return to automatic waypoint sequencing.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Diamond DA62 System Software Version 2056 10 or later...
Page 2: ......
Page 4: ......
Page 219: ......
