Garmin G1000 NXi Cockpit Reference Guide for the da62
190-02622-00 Rev. A
57
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Annun/Alerts
Appendix
Index
Flight
Instruments
EIS
Nav/Com/
XP
d
R/
a
udio
Flight
Management
Hazar
d
avoidance
a
FCS
a
dditional
Featur
es
a
bnormal
o
per
ation
a
nnun/
a
lerts
a
ppendix
Index
3)
Select a different arrival, if desired.
a)
Turn the large
FMS
Knob to highlight the arrival. The arrival is previewed on the map.
b)
Turn the small
FMS
Knob to view the available arrivals. Press the
ENT
Key to select
the arrival. The cursor moves to the ‘Transition’ Box (only if there are available
transitions). The arrival is previewed on the map.
c)
Turn the small
FMS
Knob to view the available transitions. Press the
ENT
Key to
select the transition. The cursor moves to the ‘Runway’ Box. The arrival is previewed
on the map.
d)
Turn the small
FMS
Knob to view the available runways. Press the
ENT
Key to select
the runway. The cursor moves to the ‘Sequence’ Box. The arrival is previewed on the
map.
4)
Press the
MENU
Key to display the Arrival Information ‘Page Menu’ Window.
5)
Turn the
FMS
Knob to highlight ‘Load Arrival’.
6)
Press the
ENT
Key to load the arrival procedure into the active flight plan.
Loading an arrival procedure into a stored flight plan:
1)
Select a stored flight plan from the ‘FPL - Flight Plan Catalog’ Page.
2)
Press the
Edit
Softkey; or press the
MENU
Key, select ‘Edit Flight Plan’, and press the
ENT
Key. The ‘FPL - Stored Flight Plan’ Page is displayed.
3)
Press the
Ld STaR
Softkey; or press the
MENU
Key, select “Load Arrival”, and press the
ENT
Key. The ‘PROC - Arrival Loading’ Page is displayed.
4)
Select an arrival. Press the
ENT
Key.
5)
Select a transition for the selected arrival. Press the
ENT
Key.
6)
Select a runway served by the selected arrival, if required. Press the
ENT
Key.
7)
Press the
ENT
Key to load the selected arrival procedure.
Removing an arrival from the active flight plan:
1)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the ‘Flight Plan’
Window (PFD).
2)
Press the
MENU
Key, and highlight ‘Remove Arrival’.
3)
Press the
ENT
Key. A confirmation window is displayed listing the arrival procedure.
4)
With ‘OK’ highlighted, press the
ENT
Key. To cancel the removal request, highlight
‘Cancel’ and press the
ENT
Key.
Removing an arrival from a stored flight plan:
1)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page.
2)
Turn the small
FMS
Knob clockwise one click to display the ‘FPL - Flight Plan Catalog’
Page.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Diamond DA62 System Software Version 2056 10 or later...
Page 2: ......
Page 4: ......
Page 219: ......
