Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A
60
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
CREATING AND ADDING USER WAYPOINTS TO THE ACTIVE FLIGHT PLAN
USING THE MAP POINTER
1)
Press the
FPL
Key
2)
Press the
FMS
Knob on the MFD to activate the cursor.
3)
Select the point in the flight plan to add the new waypoint.
4)
Push the
Joystick
on the MFD to activate the panning function on the ‘FPL
- Active Flight Plan’ Page and pan to the map location of the desired user
waypoint.
5)
Press the
LD WPT
Softkey; or press the
MENU
Key, select ‘Load Waypoint’, and press
the
ENT
Key. The user waypoint is created with a name of USRxxx (using the next
available in sequence) and is added to the active flight plan.
ADDING A WAYPOINT TO AN EXISTING STORED FLIGHT PLAN
1)
On the ‘FPL - Flight Plan Catalog’ Page, press the
FMS
Knob to activate the
cursor.
2)
Highlight the desired flight plan.
3)
Press the
EDIT
Softkey; or press the
ENT
Key, turn the large
FMS
Knob
clockwise to select “EDIT” and press the
ENT
Key. The ‘FPL - Stored Flight
Plan’ Page is displayed.
4)
Select the point in the flight plan to add the new waypoint. The new
waypoint is placed directly in front of the highlighted waypoint.
5)
Turn the small
FMS
Knob to display the ‘Waypoint Information’ Window.
(Turning it clockwise displays a blank ‘Waypoint Information’ Window,
turning it counter-clockwise displays the ‘Waypoint Information’ Window
with a waypoint selection submenu allowing selection of active flight plan,
nearest, recent, user, or airway waypoints).
6)
Enter the identifier, facility, or city name of the waypoint or select a
waypoint from the submenu of waypoints and press the
ENT
Key. The new
waypoint now exists in the flight plan.
REMOVING AN INDIVIDUAL WAYPOINT FROM THE ACTIVE FLIGHT PLAN
1)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page (MFD) or the
‘Flight Plan’ Window (PFD).
2)
Press the
FMS
Knob to activate the cursor (not required on the PFD) and
turn the large
FMS
Knob to highlight the waypoint to be removed.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Cessna NAV III System Software Version 2501 09 or later...
Page 2: ......
Page 4: ......
Page 259: ......
