Garmin G1000 NXi Cockpit Reference Guide for the Cessna NAV III
190-02178-02 Rev. A
71
Flight Management
Flight
Instruments
EIS
Nav/Com/
XPDR/Audio
Flight
Management
Hazar
d
Avoidance
AFCS
Additional
Featur
es
Abnormal
Oper
ation
Annun/Alerts
Appendix
Index
5)
Turn either
FMS
Knob to highlight an empty or existing flight plan.
6)
Press the
Import
Softkey; or press the
MENU
Key, select “Import Flight
Plan”, and press the
ENT
Key.
If an empty slot is selected, a list of the available flight plans on the SD
card will be displayed.
Or
:
If an existing flight plan is selected, an “Overwrite existing flight plan?
OK or CANCEL” prompt is displayed. Press the
ENT
Key to choose to
overwrite the selected flight plan and see the list of available flight
plans on the SD card. If overwriting the existing flight plan is not
desired, select “CANCEL” using the
FMS
Knob, press the
ENT
Key, select another flight plan slot, and press the
Import
Softkey
again.
7)
Turn the small
FMS
Knob to highlight the desired flight plan for importing.
8)
Press the
ENT
Key to initiate the import.
9)
Press the
ENT
Key again to confirm the import.
EXPORTING A FLIGHT PLAN TO AN SD CARD
1)
Insert the SD card into the top card slot on the MFD.
2)
Press the
FPL
Key to display the ‘FPL - Active Flight Plan’ Page on the MFD.
3)
Turn the small
FMS
Knob to select the ‘FPL - Flight Plan Catalog’ Page.
4)
Press the
FMS
Knob to activate the cursor.
5)
Turn the large
FMS
Knob to highlight the flight plan to be exported.
6)
Press the
Export
Softkey; or press the
MENU
Key, select “Export Flight
Plan”.
7)
If desired, change the name for the exported file by turning the large
FMS
Knob to the left to highlight the name, then use the small and large
FMS
knobs to enter the new name, and press the
ENT
Key.
8)
Press the
ENT
Key to initiate the export.
9)
Press the
ENT
Key to confirm the export.
Summary of Contents for G1000 NXi
Page 1: ...Cockpit Reference Guide Cessna NAV III System Software Version 2501 09 or later...
Page 2: ......
Page 4: ......
Page 259: ......
