Garmin G1000 Pilot’s Guide for Piper PA32
190-00692-00 Rev. B
6-32
HAZARD AVOIDANCE
CELL AND STRIKE MODE ON THE NAVIGATION MAP
On the Navigation Map, cell mode identifies cells of lightning activity (Figure 6-39). Stormscope identifies
clusters of electrical activity that indicate cells. Strike mode indicates the approximate location of lightning
strikes.
Selecting the ‘cell’ or ‘strike’ mode on the Navigation Map:
1)
Press the
MENU
Key.
2)
With ‘Map Setup’ selected, press the
ENT
Key.
3)
Select the ‘Weather’ group.
4)
Press the
ENT
Key. The cursor flashes on ‘STRMSCP LTNG’.
5)
Turn the
large FMS
Knob to select ‘STRMSCP MODE’.
6)
Turn the
small
FMS
Knob to change between ‘CELL’ and ‘STRIKE’ options. When an item is selected, press the
ENT
Key.
7)
Press the
FMS
knob to return to the Navigation Map Page.
Figure 6-39 Navigation Map Page with Stormscope
Lightning Data
30 nm Map
Range
Stormscope
Icon
Map
Orientation
Stormscope
Mode
Strike Rate
per Minute
If heading input is lost, strikes and/or cells must be cleared manually after the execution of each turn
(Figure 6-40). This is to ensure that the strike and/or cell positions are depicted accurately in relation to the
nose of the aircraft.
Summary of Contents for G1000:Piper
