190-00692-00 Rev. B
Garmin G1000 Pilot’s Guide for Piper PA32
4-5
AUDIO PANEL AND CNS
6
COM3
– Not used in Piper PA32 aircraft.
7
COM 1/2
–
Split COM Key. Allows simultaneous transmission on COM1 and COM2 by the pilot and copilot.
8
TEL
– Not used in Piper PA32 aircraft.
9
PA
– Selects the passenger address system. The selected COM transmitter is deselected when the
PA
Key
is pressed.
10
SPKR
– Selects and deselects the cabin speaker. COM and NAV receiver audio can be heard on the
speaker.
11
MKR/MUTE
– Selects marker beacon receiver audio. Mutes the currently received marker beacon receiver
audio. Unmutes automatically when new marker beacon audio is received. Also, stops play of recorded
COM audio.
12
HI SENS
– Press to increase marker beacon receiver sensitivity. Press again to return to low sensitivity.
13
DME
– Turns optional DME audio on or off.
14
NAV1
– When selected, audio from the #1 NAV receiver can be heard.
15
ADF
– Turns the optional ADF receiver audio on or off.
16
NAV2
– When selected, audio from the #2 NAV receiver can be heard.
17
AUX
– Not used in Piper PA32 aircraft.
18
MAN SQ
– Enables manual squelch for the intercom. When the intercom is active, press the
PILOT
Knob
to illuminate ‘SQ’. Turn the
PILOT/PASS
Knobs to adjust squelch.
19
PLAY
– Press once to play the last recorded COM audio. Press again while audio is playing and the
previous block of recorded audio will be played. Each subsequent press plays each previously recorded
block. Pressing the
MKR/MUTE
Key during play of a memory block stops play.
20
PILOT
– Selects and deselects the pilot intercom isolation.
21
COPLT
– Selects and deselects the copilot intercom isolation.
22
PILOT Knob
– Press to switch between volume and squelch control as indicated by the ‘VOL’ or ‘SQ’ being
illuminated. Turn to adjust intercom volume or squelch. The
MAN SQ
Key must be selected to allow
squelch adjustment.
23
PASS Knob
– Turn to adjust Copilot/Passenger intercom volume or squelch. The
MAN SQ
Key must be
selected to allow squelch adjustment.
24
Reversionary Mode Button
– Manually selects Reversionary Mode.
Summary of Contents for G1000:Piper
