Garmin G1000H
™
Pilot’s Guide for the Bell 407GX
190-01255-00 Rev A
58
FLIGHT INSTRUMENTS
Navigation angles (track, heading, course, bearing) are set on the AUX - System Setup Page and are either
corrected to the computed magnetic variation (‘Mag Var’), referenced to true north (denoted ‘T’), or corrected
according to user input (denoted ‘U’). When an approach referenced to true north has been loaded into the
flight plan, the system generates a message to change the navigation angle setting to ‘True’ at the appropriate
time.
Figure 2-18 Heading and Course Indications (True)
Figure 2-19 Heading and Course Indications (User)
Changing the navigation angle setting:
1)
Use the
FMS
Knob to select the AUX - System Setup Page on the MFD.
2)
Press the
FMS
Knob to activate the cursor.
3)
Turn the large
FMS
Knob to highlight ‘Nav Angle’ in the ‘Display Units’ box.
4)
Turn the small
FMS
Knob to highlight the desired setting and press the
ENT
Key.
•
TRUE
-
References angles to true north (denoted with ‘T’)
•
MAGNETIC - Angles corrected to the computed magnetic variation (‘Mag Var’)
•
USER - Angle set according to user input
Figure 2-20 Navigation Angle Settings
(AUX - System Setup Page)
Summary of Contents for G1000H
