Page 5-2
G300 Installation Manual – GTP 59
Revision A
190-00921-01
5.2.2
Environmental Qualification Form
Refer to the GTP 59 Environmental Qualification Form (Garmin P/N 005-00191-97) for a complete list of
environmental characteristics.
5.3
Installation Considerations
5.3.1
GTP 59 Icing
The GTP 59 OAT probe has no icing protection. If ice accumulates on the GTP 59 OAT probe, its
accuracy is unknown. Consequently, air temperature measurements may be incorrect if ice accumulates
on the probe. Furthermore, computations dependent upon air temperature measurements may be affected
(e.g. true airspeed and delta-ISA).
5.3.2
GTP 59 OAT Probe Installation
NOTE
The following instructions are general guidance.
Table 5-3 contains a list of parts needed for the GTP 59 installation and interconnect harness. Reference
numbers in the table and instructions refer to item bubble numbers shown in Figure B-4.1.
Table 5-3. Parts Needed for GTP 59 Installation
Figure B-4.1
Description
Qty. Included
GPN
1 Ring
Terminal
2 3-Conductor
Cable
3 OAT
Sensor
1 494-00022-xx
4 Nut 1
210-00055-00
5 Washer 1
212-00026-00
