background image

14

Appendix

Accessories and  

Packing List

To obtain accessories for your SL40 please contact 
your Garmin dealer. 
Help us better support you by completing our on-line 
registration form today! Registration ensures that you 
will be notified of product updates and new products 
and provides lost or stolen unit tracking. Please, have 
the serial number of your SL40 handy, connect to 
our web site (

www.garmin.com

) and look for our 

Product Registration link on the home page. 
The SL40 display lens is coated with a special anti-
reflective coating which is very sensitive to skin oils, 
waxes, and abrasive cleaners. It is very important 
to clean the lens using an eyeglass cleaner that is 
specified as safe for anti-reflective coatings (one suit-
able product is Wal-Mart Lens Cleaner) and a clean, 
lint-free cloth. 

Performance

Transmit Power: 8 watts Carrier Power (28 watts Input Power)
Input Voltage Range: 10 to 40 VDC
Operating Temperature Range: -20° to +55° C
Certified TSO C37d (transmitting)
Certified TSO C38d (receiving)
Certified TSO C128 (Stuck Mic)

Physical

Dimensions: 1.3” (H) x 6.25” (W) x 10.5” (D)
Weight:  2 lbs

Specifications, Accessories, & Packing

Summary of Contents for G300 for Cessna SkyCatcher























Reviews: