FAA Approved AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
190-01754-01 Rev. 4
P a g e
|
4-4
3. Approach Minimums------------------------------------------------ Set the barometric minimums alert bug
•
On the PFD, Touch the
HSI.
•
Touch the Highlight Minimums window.
•
Enter Barometric Altitude Minimums and touch ENTER
4. G3X Touch CDI source ------------------------------------------------ Touch the HSI display on the PFD.
PFD Options window opens.
5. Select the external navigator from the CDI Source window (LOC 1 or 2).
6. Press and Hold BACK Button to return to normal PFD display.
If Flying Vectors-To-Final:
7. Activate Vectors-to-Final on the external navigator, verify CDI changes to LOC and slews to the
inbound course,
OR,
•
If using a VHF navigation receiver, set the CDI to the desired course --------- Touch the Selected
Course window on the PFD.
•
Enter the desired LOC course, press ENTER.
8. Establish Intercept Heading.
9. Verify ACTIVE and ARMED modes on the PFD FD mode bar if using the autopilot/FD.
10. Upon reaching the LOC course, turn inbound and follow the ILS course and vertical guidance.
11. Set Missed Approach Altitude ------------------------------------ Touch the Reference Altitude display.
Enter the missed approach altitude.
12. At Decision Altitude (DA), continue visually for a normal landing,
OR,
•
Press GO AROUND button and fly the missed approach procedure.
If Flying Full Approach Including Transition:
ACTIVATE THE APPROACH on the External navigator,
Or,
ACTIVATE a DIRECT TO the IAF on the External navigator.
1. Navigation Source ---------------------------------------------------- Select GPS on the external navigator
2. Select IAF waypoint and execute the Direct-TO on the external navigator
3. G3X Touch CDI source -------------------------------------------------- Touch the HSI display on the PFD.
PFD Options window opens.
4. Select the external navigator from the CDI Source window (GPS 1 or 2).