190-01754-01 Rev. 4
FAA Approved AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
P a g e
|
4-9
1. Load the approach into the External navigator.
2. Navigation Source ---------------------------------------------------- Select GPS on the external navigator
3. Approach Minimums----------------------------------------------- Set the barometric minimums alert bug:
•
On the PFD, Touch the HSI.
•
Touch the Highlight Minimums window.
•
Enter Barometric Altitude Minimums and touch ENTER
4. G3X Touch CDI source ------------------------------------------------ Touch the HSI display on the PFD.
PFD Options window opens.
5. Select the external navigator from the CDI Source window (GPS 1 or 2).
6. Press and Hold BACK Button to return to normal PFD display.
If Flying Vectors-To-Final:
7. Activate Vectors-to-Final on the external navigator ------- Verify CDI slews to the inbound course.
8. Establish Intercept Heading.
9. Verify ACTIVE and ARMED modes on the PFD FD mode bar if using the autopilot/FD.
10. Upon reaching the GPS course, turn inbound and follow the GPS course.
11. Verify on the HSI the Navigation mode indicates the approach being flown, (LNAV or LP)
12. Set Minimum Descent Altitude (MDA) --------------------------- Touch the Reference Altitude display.
Enter the Minimum Descent Altitude.
13. At the Final Approach Fix (FAF), begin descent to an intermediate altitude or the Minimum
Descent Altitude.
14. At the Minimum Descent Altitude, Set Missed Approach Altitude - Touch the Reference Altitude
display. Enter the Missed Approach Altitude.
15. At Missed Approach Point, Continue visually for a normal landing,
OR
•
Press GO AROUND button and fly the missed approach procedure.
If Flying Full Approach Including Transition:
ACTIVATE THE APPROACH on the External navigator,
Or,
ACTIVATE a DIRECT TO the IAF on the External navigator.
7. Navigation Source ---------------------------------------------------- Select GPS on the external navigator
8. Select IAF waypoint and execute the Direct-TO on the external navigator
9. G3X Touch CDI source -------------------------------------------------- Touch the HSI display on the PFD.
PFD Options window opens.
10. Select the external navigator from the CDI Source window (GPS 1 or 2).
11. Press and Hold BACK Button to return to normal PFD display.
12. Verify ACTIVE and ARMED modes on the PFD FD mode bar if using the autopilot/FD.
