Garmin G3X Pilot’s Guide
190-01115-00 Rev. K
97
Flight Instruments
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
OBS MODE
NOTE:
If configured, the selected external GPS navigator (i.e., GTN or GNS
Series Units) is used to set the OBS Mode.
Enabling Omni-bearing Selector (OBS) Mode suspends the automatic sequencing
of waypoints in a GPS flight plan, but retains the current “active-to” waypoint as the
navigation reference even after passing the waypoint. ‘OBS’ is annunciated to the left
of the aircraft symbol when OBS Mode is selected.
While OBS Mode is enabled, a course line is drawn through the “active-to” waypoint
on the moving map. If desired, the course to/from the waypoint can now be adjusted.
When OBS Mode is disabled, the GPS flight plan returns to normal operation with
automatic sequencing of waypoints, following the course set in OBS Mode. The flight
path on the moving map retains the modified course line.
Omni-bearing Selector (OBS) Mode (Split-Screen)
Extended Course Line
OBS Course
Softkey
OBS Mode Box
OBS Mode Annunciation
Enabling/disabling OBS Mode (without external GPS navigator):
1)
From the Active Flight Plan Page press the
MENU
Key while navigating a
flight plan or Direct-to.
2)
With ‘Set OBS and Hold’ highlighted, press the
ENT
Key. The OBS Mode
Box is highlighted.
3)
Turn the
FMS
Joystick to select the desired course to/from the waypoint.
4)
To cancel OBS Mode and return to automatic waypoint sequencing, press
the
MENU
Key, with ‘Release Hold’ highlighted, press the
ENT
Key.
Summary of Contents for G3X Touch
