Garmin G3X Pilot’s Guide
190-01115-00 Rev. K
128
CNS Interface
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
ALTITUDE MODE (AUTOMATIC OR MANUAL)
Altitude Mode is automatically selected when the aircraft becomes airborne. Altitude
Mode may also be selected manually by pressing the
ALT
Softkey.
If Altitude Mode is selected, a green ALT indication and transponder code appear
in the mode field of the Transponder Data Box, and all transponder replies requesting
altitude information are provided with pressure altitude information.
REPLY STATUS
When the transponder sends replies to interrogations, a white R indication appears
momentarily in the Transponder Data Box.
ENTERING A TRANSPONDER CODE
Entering a transponder code:
1)
From the full-screen PFD and/or split-screen PFD Page, press the
XPDR
Softkey.
2)
Press the
CODE
Softkey. A Transponder Code Box appears with the cursor
on the first digit in the code.
3)
Enter the desired code using the
FMS
Joystick and press the
ENT
Key.
Transponder Code Entry (Split-Screen PFD Page)
CODE
Softkey
Transponder
Code Entry
Summary of Contents for G3X Touch
