Garmin G3X Pilot’s Guide
190-01115-00 Rev. K
129
CNS Interface
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
VFR CODE
The VFR code can be entered either manually or by pressing the
XPDR
Softkey,
the
CODE
Softkey, then the
VFR
Softkey. When the
VFR
Softkey is pressed, the pre-
programmed VFR code is automatically displayed in the code field of the Transponder
Data Box. Pressing the
VFR
Softkey again restores the previous identification code.
IDENT FUNCTION
Pressing the
IDENT
Softkey sends a distinct identity indication to Air Traffic Control
(ATC). The indication distinguishes the identing transponder from all the others on
the air traffic controller’s screen. When the
IDENT
Softkey is pressed, a white IDENT
indication is displayed in the mode field of the Transponder Data Box for a duration of
18 seconds.
ADS-B OUT
When configured with an ADS-B Out capable transponder,
‘NO ADSB’
is displayed
in yellow, in the Transponder Data Box, if the ADS-B Out broadcast has been manually
disabled or if the transponder does not have the required GPS data.
Transponder is
not broadcasting
ADS-B Out data
NO ADS-B (Split-Screen PFD Page)
Summary of Contents for G3X Touch
