Garmin G3X Pilot’s Guide
190-01115-00 Rev. K
165
GPS Navigation
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
5.6 DIRECT-TO NAVIGATION USING THE G3X
NOTE:
The G3X
Direct-to
Key is disabled while using an external GPS naviga-
tor. Press the
INTERNAL
Softkey on the Direct-to Page to make changes to
the active flight plan from the G3X. Press the
EXTERNAL
Softkey to return
to the external GPS navigator’s flight plan.
The Direct-to method of navigation, initiated by pressing the
Direct-to
Key is
quicker to use than a flight plan when the desire is to navigate to a single point such
as a nearby airport.
Once a direct-to is activated, the G3X establishes a point-to-point course line from
the present position to the selected direct-to destination. Course guidance is provided
until the direct-to is replaced with a new direct-to or flight plan, or cancelled.
Entering a waypoint identifier, facility name, or city as a direct-to
destination:
1)
Press the
Direct-to
Key. The Direct-to Window is displayed (with the active
flight plan waypoint as the default selection or a blank waypoint field if no
flight plan is active).
2)
If an external navigator is configured, press the
INTERNAL
Softkey.
3)
Turn the
FMS
Joystick clockwise to begin entering a waypoint identifier
(turning it counter-clockwise brings up the waypoint selection submenu -
press the
CLR
Key or the
FMS
Joystick to remove it), press the
RECENT
Softkey to display a list of recent waypoints, or move the
FMS
Joystick to
select the facility name, or city field.
4)
Press the
ENT
Key.
5)
With ‘Activate’ highlighted, press the
ENT
Key.
Summary of Contents for G3X Touch
