Garmin G3X Touch Pilot'S Manual Download

Page: 210 / 470

Garmin G3X Pilot’s Guide

190-01115-00 Rev. K

188

Flight Planning

System

Overview

Flight

Instruments

EIS

CNS

Interface

GPS

Navigation

Flight

Planning

Hazar

Avoidance

Additional

Featur

AFCS

Annun/Alerts

Appendix

Index

Press the

SEL APPR

Softkey; or press the

MENU

Key, highlight ‘Select

Approach’ by turning or moving the

FMS

Joystick, and press the

ENT

Key.

The Select Approach Window is displayed.

Turn the

FMS

Joystick to access a list of available approaches. Turn or

move

FMS

Joystick to highlight the desired approach and press the

ENT

Key.

With ‘Load Approach’ highlighted, press the

ENT

Key. To cancel the

request, press the

CLR

Key or the

FMS

Joystick.

Viewing a chart for the selected approach:

With an approach selected in the Select Approach Window, press the

MENU

Key. The Show Chart Menu is displayed.

Select Approach Menu

Press the

ENT

Key. A chart displaying the selected approach is displayed.

Press the

EXIT

Softkey to return to the Select Approach Window.

Activating an approach on the Active Flight Plan Page:

Press the

FPL

Key.

Turn the

FMS

Joystick to display the Active Flight Plan Page (if necessary).

Press the

SEL APPR

Softkey; or press the

MENU

Key, highlight ‘Select

Approach’ by turning or moving the

FMS

Joystick, and press the

ENT

Key.

The Select Approach Window is displayed.

Turn the

FMS

Joystick to access a list of available approaches. Turn or

move the

FMS

Joystick to highlight the desired approach and press the

ENT

Key.

With ‘Activate Approach’ highlighted, press the

ENT

Key. To cancel the

request, press the

CLR

Key or the

FMS

Joystick.

With an approach loaded on the Active Flight Plan Page, press the

MENU

Key.

Turn or move the

FMS

Joystick to highlight ‘Activate Approach’, and press

the

ENT

Key.

Summary of Contents for G3X Touch























































































































































































































































































































































































































































































Search results

Summary of Contents for G3X Touch

Reviews:

Related manuals for G3X Touch

Brands by name

Popular brands

Garmin G3X Touch, Pilot'S Manual

Search results

Summary of Contents for G3X Touch

Reviews:

Related manuals for G3X Touch

Brands by name

Popular brands