Garmin G3X Pilot’s Guide
190-01115-00 Rev. K
229
Hazard Avoidance
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
SYNTHETIC VISION
Terrain is integrated within Synthetic Vision (when active) to provide land contours
(colors are consistent with those of the topographical map display), large water
features, towers, obstacles over 200’ AGL, as well as visual and auditory alerts to
indicate the presence of terrain and obstacle threats relevant to the projected flight
path. Synthetic Vision terrain information is displayed in red and yellow shading on the
PFD. Refer to section 8.1 (Synthetic Vision) for more information.
TERRAIN INFORMATION
The areas of the terrain shaded red are predicted to be within 100 feet below or
above the aircraft. The yellow terrain areas are between the user-defined Caution
Elevation and 100 feet below the aircraft. By default, the Caution Elevation is 1,000
feet; therefore, the areas in yellow are between 1,000 feet and 100 feet below the
aircraft. The black areas are further than the Caution Elevation. A projected point of
impact is marked with an “X” symbol.
Enabling/Disabling Terrain Shading on the Map Page:
From the Map Page with the VFR Map displayed, press the
TERRAIN
Softkey.
Or
:
1)
From the Map Page, press the
MENU
Key.
2)
Turn or move the
FMS
Joystick to highlight ‘Set Up Map’, and press the
ENT
Key.
3)
Turn the
FMS
Joystick to highlight the ‘Map’ Category from the horizontal
list.
4)
Move the
FMS
Joystick to highlight the ‘Terrain Shading’ field.
5)
Turn the
FMS
Joystick to select ‘On’ or ‘Off’, and press the
ENT
Key.
Summary of Contents for G3X Touch
