Garmin G3X Pilot’s Guide
190-01115-00 Rev. K
249
Hazard Avoidance
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
OPERATION
NOTE:
The GTS 800 automatically transitions from
STANDBY
to
OPERATE
mode eight seconds after takeoff. The unit also automatically transitions
from
OPERATE
to
STANDBY
mode 24 seconds after landing.
After power-up, the GTS 800 is in Standby Mode. The GTS 800 must be in Operating
Mode for traffic to be displayed and for TAs to be issued.
Pressing the
OPERATE
Softkey allows the traffic unit to switch from Standby Mode
to Operating Mode as necessary. Pressing the
STANDBY
Softkey forces the unit into
Standby Mode.
Switching from operating mode to standby mode:
On the Traffic Page, select the
STANDBY
Softkey
Switching from standby mode to operating mode:
On the Traffic Page, press the
OPERATE
Softkey
Changing the altitude range:
1)
On the Traffic Page, select the
ALT MODE
Softkey.
2)
Press one of the following Softkeys:
•
ABOVE:
Displays non-threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
•
NORMAL:
Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
enroute phase of flight.
•
BELOW:
Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
•
UNREST
(unrestricted)
:
All traffic is displayed from 9900 feet above
and 9900 feet below the aircraft.
3)
To return to the Traffic Page, press the
BACK
Softkey.
Summary of Contents for G3X Touch
