manualshive.com logo in svg

Garmin G3X Touch, Pilot'S Manual

The Garmin G3X Touch is an advanced avionics system designed for pilots. Enhance your flying experience with this intuitive touchscreen display, packed with features and capabilities. Access the comprehensive and detailed Pilot's Manual for free download, exclusively from 88.208.23.73:8080, to unlock the full potential of this exceptional product.

Share
Download
background image

Garmin G3X Pilot’s Guide

190-01115-00 Rev. K

Appendix I

437

System

 

Overview

Flight

 

Instruments

EIS

CNS

Interface

GPS
 

Navigation

Flight

Planning

Hazar

d 

Avoidance

Additional

Featur

es

AFCS

Annun/Alerts

Appendix

Index

APPENDIX I:  LICENSE AGREEMENT AND 
WARRANTY

CONTACT GARMIN

Contact Garmin if you have any questions while using your G3X. In the USA contact Garmin Product Support by 
phone: (913) 397-8200 or (800) 800-1020, Monday–Friday, 8 AM–5 PM Central Time; or go to www.garmin.com/
support.
In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 (within the 
UK).

SOFTWARE LICENSE AGREEMENT

BY USING THE G3X, YOU AGREE TO BE BOUND BY THE TERMS AND CONDITIONS OF THE FOLLOWING 
SOFTWARE LICENSE AGREEMENT. PLEASE READ THIS AGREEMENT CAREFULLY.
Garmin grants you a limited license to use the software embedded in this device (the “Software”) in binary 
executable form in the normal operation of the product. Title, ownership rights, and intellectual property rights in 
and to the Software remain with Garmin.
You acknowledge that the Software is the property of Garmin and is protected under the United States of America 
copyright laws and international copyright treaties. You further acknowledge that the structure, organization, and 
code of the Software are valuable trade secrets of Garmin and that the Software in source code form remains 
a valuable trade secret of Garmin. You agree not to decompile, disassemble, modify, reverse assemble, reverse 
engineer, or reduce to human readable form the Software or any part thereof or create any derivative works 
based on the Software. You agree not to export or re-export the Software to any country in violation of the export 
control laws of the United States of America.

LIMITED WARRANTY

The Garmin G3X LRU’s that comply with TSO (Technical Standard Order) requirements for certification (GMU 44 
and GTP 59) are warranted to be free from defects in materials or workmanship for two years from the date of 
purchase.  The Garmin G3X LRU’s that do not comply with TSO requirements for certification (GDU 370, GDU 375, 
and the GSU 73) are warranted to be free from defects in materials or workmanship for one year from the date of 
purchase.  Within the specified period, Garmin will, at its sole option, repair or replace any components that fail in 
normal use.  Such repairs or replacement will be made at no charge to the customer for parts and labor, provided 
that the customer shall be responsible for any transportation cost.  This warranty does not cover failures due to 
abuse, misuse, accidents, or unauthorized alterations or repairs.  In addition, Garmin reserves the right to refuse 
warranty claims against products or services that are obtained and/or used in contravention of the laws of any 
country.

Summary of Contents for G3X Touch























































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for G3X Touch

Totech Super Dry ESDA Series Instruction Manual preview
Super Dry ESDA Series
Brand: Totech Pages: 11
Kysor/Warren DX6LN-MCU Installation And Operation Manual preview
DX6LN-MCU
Brand: Kysor/Warren Pages: 29
Zero Zone HYBRID Installation, Operation & Maintenance Manual preview
HYBRID
Brand: Zero Zone Pages: 52
Dual XHUD1000 Owner'S Manual preview
XHUD1000
Brand: Dual Pages: 79

Brands by name

Popular brands

Load more brands