Garmin G3X Pilot’s Guide
190-01115-00 Rev. K
60
System Overview
System
Overview
Flight
Instruments
EIS
CNS
Interface
GPS
Navigation
Flight
Planning
Hazar
d
Avoidance
Additional
Featur
es
AFCS
Annun/Alerts
Appendix
Index
COLOR MODE
The Color Mode setting is used to adjust the color brightness used on the map and
synthetic vision display for day or night use.
Adjusting the color mode:
1)
Press the
MENU
Key twice to display the Main Menu.
2)
Turn or move the
FMS
Joystick to highlight ‘System Setup...’ and press the
ENT
Key.
3)
Turn or move the
FMS
Joystick to highlight ‘Display’, and press the
ENT
Key.
4)
Move the
FMS
Joystick to highlight the Color Mode field.
5)
Turn the
FMS
Joystick to highlight ‘Day’, ‘Night’, or ‘Auto’.
6)
Press the
FMS
Joystick, the
CLR
Key, the
EXIT
Softkey or the
MENU
Key to
return to the previous page.
Setting the Startup Page
1)
Press the
MENU
Key twice to display the Main Menu.
2)
Turn or move the
FMS
Joystick to highlight ‘System Setup...’ and press the
ENT
Key.
3)
Turn or move the
FMS
Joystick to highlight ‘Display’, and press the
ENT
Key.
4)
Move the
FMS
Joystick to highlight the Startup Page field.
5)
Turn the
FMS
Joystick to highlight the desired Startup Page.
EIS DISPLAY LOCATION (OPTIONAL)
In Configuration Mode the ‘EIS Display Location’ setting can be set to one of the
following:
• AUTO—Displays the EIS Strip on the MFD, or on the PFD1 (and PFD2 if applicable)
if the MFD is not displayed.
• PFD—Always displays the EIS Strip on PFD1 (and PFD2 if applicable).
• User Selected—Enables the user to choose between ‘AUTO’ and ‘PFD’ via the
Display Setup menu.
For more information on how to enable the ‘EIS Display Location’ setting in
Configuration Mode refer to the G3X Installation Manual.
Summary of Contents for G3X Touch
