190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC
Page 33-60
The
vertical accel gain
can often be left set at 1.00, but can be used to improve altitude captures when
climbing or descending in VS or VNAV mode.
1. Climb to an altitude target in VS mode and observe the altitude capture.
2. Set the
vertical accel gain
higher if the aircraft objectionably overshoots the altitude target before
leveling off at the correct altitude.
3. Set the
vertical accel gain
lower if the aircraft objectionably undershoots the altitude target before
leveling off at the correct altitude.
Similar to the vertical speed gain and vertical accel gain, the airspeed gain and airspeed accel gain can be
used to improve airspeed hold performance when needed.
Pitch Gain has advanced and expert settings that can be adjusted to achieve the desired performance.
These settings are detailed in
and should only be adjusted after studying the description to
properly understand their effect on pitch gain. See preceding
to access the advanced/expert settings.