190-01115-01 G3X/G3X Touch Installation Manual - GDU 37X Config and Post Install Checkout
Rev. AC
Page 33-63
2.Left foot rudder to swing ball back right
3.Engage YD by pressing the YD button onthe GMC 30X as ball swings through
the center
4.Set SERVO GAIN so the established yaw body rate from the yaw doublet is
properly dampened out
a.Set the SERVO GAIN higher to make the yaw damper more aggressive
b.Set the SERVO GAIN lower to make the yaw damper less aggressive
2. The yaw servo has additional advanced and expert settings that can be adjusted to achieve the
desired yaw damping performance. These settings are detailed in
and should only
be adjusted after studying the description to properly understand their effect on the yaw servo. See
preceding
to access the advanced/expert settings.
